Garmin GPSMAP 500 Series 파일럿 매뉴얼 부록 - 페이지 8

{카테고리_이름} Garmin GPSMAP 500 Series에 대한 파일럿 매뉴얼 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 500 Series 27 페이지. Flat-mount kit
Garmin GPSMAP 500 Series에 대해서도 마찬가지입니다: 사용 설명서 (6 페이지), 빠른 참조 매뉴얼 (2 페이지), 참조 매뉴얼 (2 페이지), 사용 설명서 (28 페이지), 템플릿 (2 페이지), 템플릿 (1 페이지), 구성 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (4 페이지), 소유자 매뉴얼 (38 페이지), 소유자 매뉴얼 (44 페이지), 파일럿 매뉴얼 (28 페이지), 설치 지침 매뉴얼 (34 페이지), 빠른 참조 매뉴얼 (2 페이지)

Section 2

Goodrich STORMSCOPE Interface

Cell mode uses a clustering program to identify

clusters of electrical activity that indicate cells. Cell

mode is most useful during periods of heavy storm

activity. Displaying cell data during these periods frees

the user from sifting through a screen full of discharge

points and helps to better determine where the storm

cells are located.

Displaying Storm Data on the Map Page

The Map Page displays cell or strike information using yellow lightning strike symbology overlaid on

a moving map. This added capability improves situational awareness, which in turn makes it much easier

for the pilot to relate storm activity to airports, navaids, obstacles and other ground references.

Storm Activity

Storm Data Displayed on the Map Page

Storm data is displayed on the Map Page only if aircraft heading is available.

In normal operation, the current mode and rate are displayed in the top right corner of the Map Page.

The mode is described by the word "STRIKE" when in strike mode, or "CELL" when in cell mode.

The strike data display phases are:

1. Lightning Symbol (latest strikes; less than one minute; a black guard band is placed around the strike symbol

during the ﬁ rst six seconds of display)

2. Large Plus "+" sign (more than one minute old)

3. Small Plus "+" sign (more than two minutes old)

4. Strike Data is no longer displayed (after three minutes)

Cell Mode

Strike Rate