UNCONTROLLED COPY WHEN DOWNLOADED OR PRINTED
7-6
Customizing the traffic display on the Navigation Map Page:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With Map Setup highlighted, press the ENT Key.
4) Turn the small FMS Knob to select the Traffic
Group and press the ENT Key.
5) Turn the large FMS Knob or press the ENT Key to
scroll through the selections:
TRAFFIC - Turn the display of traffic data on or
off.
TRAFFIC MODE - Select the traffic mode for
display; select from:
o All Traffic - Displays all traffic
o TA/PA - Displays Traffic Advisories and
o TA Only - Displays Traffic Advisories only
TRAFFIC SMBL - Selects the maximum range at
which traffic symbols are shown
TRAFFIC LBL - Selects the maximum range at
which traffic labels are shown with the option to
turn off
6) Turn the small FMS Knob to scroll through options
(ON/OFF, range settings, etc.).
7) Press the ENT Key to select an option.
8) Press the FMS Knob or CLR Key to return to the
Navigation Map Page.
The Navigation Map Page Setup Menu also controls the
display of traffic. The setup menu controls the map
range settings. Traffic data symbols and labels can be
decluttered from the display. If a map range larger than
the map range setting is selected, the data is removed
from the map. Maps besides the Traffic Map Page use
settings based on those selected for the Navigation Map
Page.
Report No. 28-AC-061
This electronic document is not linked to a subscription for revision control or distribution. Refer to the Optional Equipment
Supplement Publications Status link under the Technical Support Page of the Enstrom Helicopter website for the current revision
ENSTROM 480B RFM SUPPLEMENT
Proximity Advisories
level of this Rotorcraft Flight Manual Supplement.
Jun 5/14
페이지 인쇄