Garmin GTN 6 series 사용 설명서 - 페이지 9

{카테고리_이름} Garmin GTN 6 series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GTN 6 series 24 페이지. Instructions for continued airworthiness for md 369e; md 369f; md 369ff
Garmin GTN 6 series에 대해서도 마찬가지입니다: 사용 설명서 (22 페이지)

페이지 인쇄

Item

Description/Procedure

Visual Inspection

The GTN unit, GMA 35 (if installed), switches, and wiring

harnesses should be inspected to ensure continued integrity of

the installation in alignment with Eurocopter's Standard

Practices Manual (MTC 20-07-02-[ ]).

Conduct a visual check of the GTN unit, switches, GMA 35 (if

installed), and their wiring harnesses to ensure continued

installation integrity.

1. Inspect the GTN unit(s) and GMA 35 for security of

2. Inspect for signs of corrosion.

3. Inspect all switches, knobs, and buttons for damage.

4. Inspect placards. Ensure that they are legible and properly

5. Inspect condition of wiring, shield terminations, routing, and

6. Check the fan intake slots on the sides and bottom of the

Instructions for Continued Airworthiness GTN 6XX/7XX - Eurocopter EC130 Series

Page 6 of 21

attachment, including visual inspection of mounting racks

and rotorcraft instrument panel or avionics console

supporting structure to which the racks attach. Verify the

countersunk fastener heads are in full contact with unit

mounting rack holes. If a GTN Navigator is installed in the

center console, inspect the condition of the console and

unit install rack around the rivets. Verify countersunk rivet

head is fully seated into the unit mounting rack fastener

hole with no slack. For GTNs installed in the instrument

panel, re-torque fasteners12 to 15 in-lbs if required.

adhered. Replace any damaged labels as necessary.

attachment/clamping.

GTN unit's bezel for dust, dirt, or obstructions. Clean as

needed.

Interval

To be performed

coincident with

the Eurocopter

EC 130 600 flight

hour inspection

or every 24

months,

whichever comes

first.

190-01007-K9 Rev. 1