AlkaWay Ultrastream Undersink Kit 설치 매뉴얼 - 페이지 6

{카테고리_이름} AlkaWay Ultrastream Undersink Kit에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AlkaWay Ultrastream Undersink Kit 12 페이지.

3. Install metal inlet tubes

1. First, unscrew the faucet nut. Then remove the faucet

nut and black washer and put aside.

2. Unscrew the tube nut from the three Metal Inlet

Tubes.

3. Lay the faucet flat on a table, with the tap handle facing

to the right, as shown. Now looking at the threaded

holes in the bottom of the faucet;

- The top hole is for the shortest metal inlet tubes.

- The bottom right hole is for the medium sized metal

inlet tube.

- And the bottom left is for the longest metal inlet tube.

4. Screw in the shortest Metal Inlet Tube into the top

hole by hand.

5. Position the spanner on the hex section on the Metal

Inlet Tubes to tighten.

6. Next screw in the medium-sized Metal Inlet Tube

tube into the bottom right hole by hand, then tighten

with a spanner.

7. Finally screw in the longest Metal Inlet Tube into the

bottom left hole by hand, then tighten with a spanner.

Note: For clarity, images are shown

without the larger threaded tube.