Garmin nuvi 500-Series 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Garmin nuvi 500-Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin nuvi 500-Series 50 페이지. Flush mount template
Garmin nuvi 500-Series에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (28 페이지), 소유자 매뉴얼 (38 페이지), 중요 정보 (1 페이지), 소유자 매뉴얼 (44 페이지), 설치 지침 매뉴얼 (6 페이지)

페이지 인쇄

Zooming In and Out of the Chart

The zoom level is indicated by the scale number at the bottom of

the chart. The bar under the scale number represents that

distance on the chart.

• Select

to zoom out.

• Select

to zoom in.

Panning the Chart

You can move the chart to view an area other than your present

location.

From the chart, drag the navigation screen or use the arrow

keys.

Select Stop Panning or Back to stop panning and return the

screen to your present location.

Selecting an Item on the Map Using the Device Keys

From a chart or 3D chart view, select , ,

the cursor.

Select SELECT.

Measuring a Distance on the Chart

From a chart or the Radar overlay, select a location.

Select Measure Distance.

A push pin appears on the screen at your present location.

The distance and angle from the pin is listed in the corner.

TIP: To reset the pin and measure from the current location of

the cursor, select Select.

Chart Symbols

This table contains some of the common symbols you might see

on the detailed charts.

Icon

Description

Buoy

Information

Marine services

Tide station

Current station

Overhead photo available

Perspective photo available

Other features common to most charts include depth contour

lines, intertidal zones, spot soundings (as depicted on the

original paper chart), navigational aids and symbols,

obstructions, and cable areas.

Navigating to a Point on the Chart

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

NOTE: The offshore Fishing chart is available with premium

charts, in some areas.

NOTE: Auto Guidance is available with premium charts, in some

areas.

From the Navigation chart or Fishing chart, select a location.

If necessary, select SELECT.

Select Navigate To.

, or

to move

CAUTION

Select an option:

• To navigate directly to the location, select Go To.

• To create a route to the location, including turns, select

Route To.

• To use Auto Guidance, select Auto Guidance.

Review the course indicated by the magenta line.

NOTE: When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance

cannot calculate part of the Auto Guidance line. This is due to

the settings for minimum safe water depth and minimum safe

obstacle height.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Viewing Location and Object Information on a Chart

You can view information about a location or an object on the

Navigation chart or the Fishing chart.

NOTE: The offshore Fishing chart is available with premium

charts, in some areas.

From the Navigation chart or Fishing chart, select a location

or object.

A list of options appears along the right side of the chart. The

options that appear vary based on the location or object you

selected.

Select an option:

• To navigate to the selected location, select Navigate To.

• To mark a waypoint at the cursor location, select New

Waypoint.

• To view the distance and bearing of the object from your

current location, select Measure Distance.

The distance and bearing appear on the screen. Select

Select to measure from a location other than your current

location.

• To view tide, current, celestial, chart notes, or local

services information near the cursor, select Information.

Viewing Details about Navaids

From the Navigation chart, Fishing chart, Perspective 3D chart

view, or Mariner's Eye 3D chart view, you can view details about

various types of navigation aids, including beacons, lights, and

obstructions.

NOTE: The offshore Fishing chart is available with premium

charts, in some areas.

NOTE: Mariner's Eye 3D and Fish Eye 3D chart views are

available with premium charts, in some areas.

From a chart or 3D chart view, select a navaid.

Select the name of the navaid.

Selecting a Map

If your product has both BlueChart g2 and Garmin LakeVü

built-in maps, you can select which map to use. Not all models

have both types of built-in maps.

From the Navigation chart, select Menu > Built-in Map.

Select an option:

• When you are on an inland lake, select LakeVü™ HD.

• When you are offshore, select BlueChart® g2.

Heading Line and Angle Markers

The heading line is an extension drawn on the map from the

bow of the boat in the direction of travel. Angle markers indicate

relative position from the heading or course over ground, which

are helpful for casting or finding reference points.

Setting the Heading and Course Over Ground Lines

You can show the heading line and the course over ground

(COG) line on the chart.

™

Charts and 3D Chart Views