Garmin echomap 40 series 소유자 매뉴얼 - 페이지 5

{카테고리_이름} Garmin echomap 40 series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin echomap 40 series 32 페이지. Vhf comm
Garmin echomap 40 series에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (15 페이지), 적합성 선언 (1 페이지), 파일럿 매뉴얼 (22 페이지), 소유자 매뉴얼 (30 페이지), 소유자 매뉴얼 (50 페이지)

페이지 인쇄

1. Gmr 20/40 Operation

GMR 20/40 O

Radar Overview

The Garmin GMR 20/40 Radar Scanner transmits a narrow beam of

microwave energy in a rotating 360° pattern. When the transmitted

energy contacts a target, some of that energy is reﬂected and returned

to the scanner. The scanner collects the returned energy for processing

and display. The GMR 20/40 is operated and adjusted using the

controls on your Gamin chartplotter. Radar data is presented on a

dedicated Radar page, or as an overlay on the Map page. All radar

controls are accessible on both pages.

The Radar Page

With the GMR 20/40 Radar properly installed, at power up, the

Garmin chartplotter should detect the GMR 20/40 as a new network

connection.

Note: A software update may be needed for the GMR 20/40

to function properly. If the message "Incompatible Software

Version" is displayed when the chartplotter is powered on, the

software in the chartplotter needs to be updated. A software

update card is provided with the GMR 20/40.

GMR 20/40 Owner's Manual

PERATION

GMR 20/40 O

PERATION

When the new radar is detected, the chartplotter automatically adds

a dedicated Radar page to the page list. If the Radar page is not

available, press and hold the ADJ/MENU key until the Main Menu is

displayed. Using the ARROW KEYPAD, highlight the System tab,

and select Radar from the Services list at the bottom of the page.

To Select the Radar page for display:

1. Press the PAGE key to display the Pages list.

2. Using the ARROW KEYPAD, select Radar.

3. Press the ENTER key.

—T

ADAR

VERVIEW

Pages List

ADAR

AGE