Garmin ECHOMAP PLUS 70 series 소유자 매뉴얼 - 페이지 10
{카테고리_이름} Garmin ECHOMAP PLUS 70 series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin ECHOMAP PLUS 70 series 50 페이지.
Garmin ECHOMAP PLUS 70 series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 설치 지침 매뉴얼 (6 페이지)
![Garmin ECHOMAP PLUS 70 series 소유자 매뉴얼](/uploads/products/server2/2313952/2313952.png)
Feature
Begin navigating to a specific waypoint or navigating a
specific route
Manually synchronize waypoints and routes with the
ECHOMAP Plus device
Getting Started with the ActiveCaptain App
You can connect a mobile device to the ECHOMAP Plus device
using the ActiveCaptain app. The app provides a quick and easy
way for you to interact with your ECHOMAP Plus device and
complete such tasks as sharing data, registering, updating the
device software, and receiving mobile device notifications.
1
Insert a memory card in one of the ECHOMAP Plus device's
card slots
(Inserting Memory Cards, page
Be sure the card is inserted each time you want to use the
ActiveCaptain feature.
2
Select ActiveCaptain > Create ActiveCaptain Memory
Card.
You might be prompted to format the memory card.
Formatting the card deletes all information saved on the card.
This includes any saved user data, such as waypoints.
Formatting the card is recommended, but not required.
Before formatting the card, you should save the data from the
memory card onto the device internal memory
Data from a Memory Card, page
card for the ActiveCaptain app, you can transfer the user
data back to the card
(Copying User Data to a Memory Card,
page
38).
3
From the ActiveCaptain page, select MENU > Wi-Fi Setup
> Wi-Fi Network > Wi-Fi > On.
4
Enter a name and password for this network.
5
From the application store on your mobile device, install and
open the ActiveCaptain app.
6
Bring the mobile device within 32 m (105 ft.) of the
ECHOMAP Plus device.
7
From your mobile device settings, open the Wi‑Fi
connections page and connect to the Garmin device, using
the name and password you entered.
Enabling Smart Notifications
Do not read or reply to notifications while operating the vessel.
Failure to pay attention to the conditions on the water can result
in vessel damage, personal injury, or death.
Before your ECHOMAP Plus device can receive notifications,
you must connect it to your mobile device and to the
ActiveCaptain app.
1
From the ECHOMAP Plus device, select ActiveCaptain >
Smart Notifications > Enable Notifications.
2
Turn on Bluetooth
technology in the mobile device settings.
®
3
Bring the devices within 10 m (33 ft.) of each other.
4
From the ActiveCaptain app on the mobile device, select
Smart Notifications > Pair with Chartplotter.
5
Follow the on-screen instructions to pair the app to the
ECHOMAP Plus device using Bluetooth technology.
6
When prompted, enter the key on your mobile device.
7
If necessary, adjust which notifications you receive in your
mobile device settings.
4
Owner Guest
Yes
Yes
2).
NOTICE
(Copying User
38). After formatting the
WARNING
Updating Software with the ActiveCaptain
App
Yes
If your device has Wi‑Fi technology, you can use the
Yes
ActiveCaptain app to download and install the latest software
updates for your device.
Software updates may require the app to download large files.
Regular data limits or charges from your Internet service
provider apply. Contact your Internet service provider for more
information about data limits or charges.
The installation process can take several minutes.
1
Connect the mobile device to the ECHOMAP Plus device
(Getting Started with the ActiveCaptain App, page
2
When a software update is available and you have internet
access on your mobile device, select Software Updates >
Download.
The ActiveCaptain app downloads the update to the mobile
device. When you reconnect the app to the ECHOMAP Plus
device, the update is transferred to the device. After the
transfer is complete, you are prompted to install the update.
3
When you are prompted by the ECHOMAP Plus device,
select an option to install the update.
• To update the software immediately, select OK.
• To delay the update, select Cancel. When you are ready
to install the update, select ActiveCaptain > Software
Updates > Install Now.
Updating Charts with ActiveCaptain
You can use the ActiveCaptain app to download and transfer the
latest chart updates for your device. To save space on your
mobile device, space on the ActiveCaptain card, and download
time, consider using the ActiveCaptain app to download only the
areas of the chart you need.
If you are downloading an entire chart, you can use the Garmin
Express
™
app to download the map onto a memory card. The
Garmin Express app downloads large charts more quickly than
the ActiveCaptain app. For more information, go to
/express.
Chart updates may require the app to download large files.
Regular data limits or charges from your internet service
provider apply. Contact your internet service provider for more
information about data limits or charges.
1
Connect the mobile device to the ECHOMAP Plus device
(Getting Started with the ActiveCaptain App, page
2
When a chart update is available, and you have internet
access on your mobile device, select OneChart > My
Charts.
3
Select the map to update.
4
Select the area to download.
5
Select Download
The ActiveCaptain app downloads the update to the mobile
device. When you reconnect the app to the ECHOMAP Plus
device, the update is transferred to the device. After the
transfer is complete, the updated charts are available for use.
Charts and 3D Chart Views
The charts and 3D chart views that are available depend on the
map data and accessories used.
You can access the charts and 3D chart views by selecting
Charts.
NOTICE
4).
garmin.com
NOTICE
4).
Charts and 3D Chart Views