Garmin Fishfinder 100 Blue 소유자 매뉴얼 - 페이지 27

{카테고리_이름} Garmin Fishfinder 100 Blue에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fishfinder 100 Blue 50 페이지. Fishfinder blue series
Garmin Fishfinder 100 Blue에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄

Tools Tab

The 'Tools' tab contains the 'Flasher,' 'Simulator' and 'Noise Reject'

tools. The 'Noise Reject' and 'Flasher' tools are used to enhance the chart

and help in identifying and providing information about an underwater

return. The 'Simulator' tool is used to enhance the simulator mode by

allowing you to customize the simulated transducer selection. To access the

'Tools' tab, place the highlight over it using the arrow keys.

Flasher

With the 'Flasher' tool active, a graphic Flasher representation will be

displayed on the far right side of the chart. This graphic Flasher displays

structure and bottom returns much the same as a true Flasher. You may

find this feature particularly useful when using 'Fish Symbols.'

To Turn the Graphic Flasher on and off:

1. Highlight the 'Tools' tab on the Setup Menu.

2. Highlight the 'Flasher' selection ﬁ eld and press ENTER.

3. Select 'On' or 'Off' and press ENTER to accept the selection.

Simulator

The 'Simulator' tool allows you to select a simulated transducer type for

use with the Fishfinder 100 Blue' s built-in display simulator. These choices

allow the simulator to more accurately depict actual operation of the unit.

For details on using the simulator, see page 35.

Noise Reject

The 'Noise Reject' tool helps filter unwanted noise from the chart. The

'Noise Reject' tool can be turned 'Off,' set for 'Auto' (automatic) adjustment

or set for 'Manual' adjustment.

Continued on page 20

Unit Operation

Setup Menu: Tools Tab

Graphic Flasher Activated

Remember when setting the Noise Reject tool, the

higher the noise rejection setting, the more likely

the unit is to not show ﬁ sh or structure.