Garmin Fishfinder 100 Blue 소유자 매뉴얼 - 페이지 43

{카테고리_이름} Garmin Fishfinder 100 Blue에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fishfinder 100 Blue 50 페이지. Fishfinder blue series
Garmin Fishfinder 100 Blue에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄

Simulator Mode

The Fishfinder 100 Blue comes with a built-in simulator. While in

simulator mode, the unit will display a random bottom scene, and the

Fishfinder 100 Blue can be controlled just as if it were on the water. Using

simulator mode allows the user to practice and learn the operation of the

unit at home rather than on the water.

If the Fishfinder 100 Blue is turned on without a transducer connected,

the unit will start in simulator mode. Also the unit can be switched into

simulator mode by selecting one of the simulated transducer options from

the 'Simulator Selection' field as described below. The unit will indicate that

it is running in simulator mode by displaying a message across the bottom

of the screen. The message will be replaced by the "S" simulator mode icon

in the lower left corner of the screen.

The unit can be configured to act as if a variety of transducers are

installed while in the simulator mode.

To select a speciﬁ c Transducer:

1. Press the SETUP button on the face of the unit.

2. Using the Arrow keys, highlight the 'Tools' tab then the 'Simulator'

selection ﬁ eld.

3. Press ENTER. Choose the desired transducer from the list.

4. Press ENTER to accept the transducer selection.

On the Water

Simulator Mode

Simulator Message and Icon

Simulator Transducer Selections