Garmin Fishfinder 160 Blue 소유자 매뉴얼 - 페이지 16

{카테고리_이름} Garmin Fishfinder 160 Blue에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fishfinder 160 Blue 50 페이지. Garmin fishfinder 160 blue owner's manual
Garmin Fishfinder 160 Blue에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄

www.reelschematic.com

Installation

Installing the Display

Be careful not to install screws that are too long!

The mounting holes in the unit are approximately 1/4"

deep. Installing screws that are too long will damage

the unit and void the warranty.

Display Installation (Flush Mount)

The Fishﬁ nder 160 Blue can be mounted ﬂ ush against a dash or

electronics rack that is no more than 1/4" thick.

Flush Mounting the Display:

1. Remove the Mounting Bracket from the back of the unit by removing

its four screws.

2 Using the Mounting Bracket as a template, mark the location of the four

mounting holes and the center relief hole.

3. Drill the mounting holes using a 6mm or 15/64" drill.

4. Using a 1-7/8" hole saw, cut the center relief.

5. Secure the unit to the mounting surface using four M5 screws.

If you are ﬂ ush mounting the unit on a sheet metal surface, use the

mounting bracket on the back to help reinforce the metal. You may also

purchase the optional Flush Mounting Kit and follow the ﬂ ush mounting

instructions included with the kit.

Mounting Bracket