Garmin Fishfinder 160 Blue 소유자 매뉴얼 - 페이지 27

{카테고리_이름} Garmin Fishfinder 160 Blue에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fishfinder 160 Blue 50 페이지. Garmin fishfinder 160 blue owner's manual
Garmin Fishfinder 160 Blue에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄

www.reelschematic.com

To change the Depth Line Setting:

1. Place the highlight over the 'Depth Line' selection on the Adjustment Bar.

2. Use the UP or DOWN Arrow to change the setting, press ENTER to

accept the change.

Flasher

With the 'Flasher' tool active, a graphic Flasher representation will be

displayed on the far right side of the chart. This graphic Flasher displays

structure and bottom returns much the same as a true Flasher. You may

find this feature particularly useful when using 'Fish Symbols.'

To Turn the Graphic Flasher on and off:

1. Highlight the 'Tools' tab on the Setup Menu.

2. Highlight the 'Flasher' selection ﬁ eld and press ENTER.

3. Select 'On' or 'Off' and press ENTER to accept the selection.

Simulator

The 'Simulator' tool allows the unit to simulate the use of four different

transducer configurations: 'Depth Only', 'Temp', 'Speed', or 'Temp and

Speed'. These choices allow the user to view more accurate depictions of

actual unit operation. For details on using the simulator, see page 35.

Noise Reject

The 'Noise Reject' tool helps filter unwanted noise from the chart. The

'Noise Reject' tool can be turned 'Off,' set for 'Auto' (automatic) adjustment

or set for 'Manual' adjustment.

Remember when setting the Noise Reject tool, the higher the noise rejection

setting, the more likely the unit is to not show ﬁ sh or structure.

Continued on page 20

Unit Operation

Setup Menu: Tools Tab

Depth Line Activated

Graphic Flasher Activated