Garmin Fishfinder 240 Blue 소유자 매뉴얼 - 페이지 41
{카테고리_이름} Garmin Fishfinder 240 Blue에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fishfinder 240 Blue 50 페이지. Garmin fishfinder 160 blue owner's manual
Garmin Fishfinder 240 Blue에 대해서도 마찬가지입니다: 소유자 매뉴얼 (50 페이지), 파일럿 매뉴얼 (12 페이지), 사양 (2 페이지), 사양 (2 페이지), 소유자 매뉴얼 (50 페이지), 소유자 매뉴얼 (50 페이지)
페이지 인쇄
Simulator Mode
The Fishfinder 160 comes with a built-in simulator mode that will allow
the user to practice and learn the operation of the unit at home rather
than on the water.
To start the simulator mode, turn the unit on without a transducer
installed. As the unit powers on, the unit will indicate that it is running
the simulator mode by displaying a message across the bottom of the chart.
The message will be replaced by the simulator mode icon in the lower left
corner of the chart. While in the simulator mode, the unit will display a
random bottom scene and the Fishfinder 160 can be controlled just as if
it were on the water.
The unit can be configured to act as if a variety of transducers are
installed while in the simulator mode.
To Select a Specifi c Transducer:
1. Press the Setup button on the face of the unit.
2. Using the arrow keys, highlight the 'Tools' tab then the 'Simulator'
selection fi eld.
3. Press ENTER. Choose the desired transducer from the list.
4. Press ENTER to accept the transducer selection.
To exit the Simulator, turn the unit off.
On the Water
On the Water
Simulator Mode
Simulator Message and Icon
Simulator Transducer Selections
33
33