Garmin Fishfinder 240 Blue 소유자 매뉴얼 - 페이지 16

{카테고리_이름} Garmin Fishfinder 240 Blue에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fishfinder 240 Blue 50 페이지. Garmin fishfinder 160 blue owner's manual
Garmin Fishfinder 240 Blue에 대해서도 마찬가지입니다: 소유자 매뉴얼 (50 페이지), 소유자 매뉴얼 (50 페이지), 파일럿 매뉴얼 (12 페이지), 사양 (2 페이지), 사양 (2 페이지), 소유자 매뉴얼 (50 페이지)

페이지 인쇄

www.reelschematic.com

Installation

Installing the Display

Be careful not to install screws that are too long!

The mounting holes in the unit are approximately 1/4"

deep. Installing screws that are too long will damage

the unit and void the warranty.

Display Installation (Flush Mount)

The Fishﬁ nder 160 Blue can be mounted ﬂ ush against a dash or

electronics rack that is no more than 1/4" thick.

Flush Mounting the Display:

1. Remove the Mounting Bracket from the back of the unit by removing

its four screws.

2 Using the Mounting Bracket as a template, mark the location of the four

mounting holes and the center relief hole.

3. Drill the mounting holes using a 6mm or 15/64" drill.

4. Using a 1-7/8" hole saw, cut the center relief.

5. Secure the unit to the mounting surface using four M5 screws.

If you are ﬂ ush mounting the unit on a sheet metal surface, use the

mounting bracket on the back to help reinforce the metal. You may also

purchase the optional Flush Mounting Kit and follow the ﬂ ush mounting

instructions included with the kit.

Mounting Bracket