Garmin Fishfinder 240 Blue 소유자 매뉴얼 - 페이지 37

{카테고리_이름} Garmin Fishfinder 240 Blue에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fishfinder 240 Blue 50 페이지. Garmin fishfinder 160 blue owner's manual
Garmin Fishfinder 240 Blue에 대해서도 마찬가지입니다: 소유자 매뉴얼 (50 페이지), 소유자 매뉴얼 (50 페이지), 파일럿 매뉴얼 (12 페이지), 사양 (2 페이지), 사양 (2 페이지), 소유자 매뉴얼 (50 페이지)

페이지 인쇄
Garmin Fishfinder 240 Blue 소유자 매뉴얼
www.reelschematic.com
www.reelschematic.com

Memory Tab

The 'Memory' tab contains the settings for unit memory and allows you
to reset the unit to the factory settings and review the software version. To
access the 'Memory' tab, use the arrow keys to highlight it.

Remember

The Fishfi nder 160 Blue can be set to remember its settings each time
you power it on. You can set it to remember the settings in the Setup
Menu ('Setup Only') or the unit' s settings in both the Setup Menu and the
Adjustment Bar ('All').
To select a Memory Setting:
1. Highlight the 'Memory' tab on the Setup Menu.
2. Highlight the 'Remember' fi eld and press ENTER.
3. Choose 'All' or 'Setup Only,' then press ENTER to accept the selection.

Factory Setup

To restore the Factory Settings:
1. Highlight the 'Memory' tab on the Setup Menu.
2. Highlight the 'Factory' Setup button and press ENTER.
3. Choose 'OK' to reset the unit or 'Cancel' to abort.

Software Version

The 'Software Version' Button will report information about the current
software version in the unit and display the Unit ID Number.
To activate the Software Version Window:
1. Highlight the 'Memory' tab on the Setup Menu.
2. Highlight the 'Software Version' button and press ENTER.
3. Press ENTER to close the information window.
Unit Operation
Setup Menu: Memory Tab
Remember Selections
Software Version Information
Restore
Factory Settings
29