Garmin Fishfinder 320C 사용 설명서 및 참조 설명서 - 페이지 16

{카테고리_이름} Garmin Fishfinder 320C에 대한 사용 설명서 및 참조 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fishfinder 320C 38 페이지. Sunlight-readable color sonar
Garmin Fishfinder 320C에 대해서도 마찬가지입니다: 템플릿 매뉴얼 (1 페이지), 사양 (2 페이지), 사양 (2 페이지)

페이지 인쇄

1. Wiring and Interfacing

Unit Operation

Keypad Usage

ZOOM

FREQ

DATA

GAIN

QUIT

RANGE

ENTER

PAUSE

NOTE: Always press and release a key to perform

its primary function. Pressing and holding a key will

activate its secondary function (if available).

Using the Keypad

ZOOM Key— displays the Zoom adjustment control. Pressing Up/Down on the ARROW KEYPAD will

select the desired zoom level.

FREQ Key— displays the Frequency adjustment control. Pressing Up/Down on the ARROW KEYPAD will

select the desired sonar frequency.

DATA Key— toggles the data ﬁ eld in the upper left of the Sonar Page between the Basic and Advanced

displays. When held for more than 2 seconds, enters Advanced data setup.

GAIN Key— displays the Gain adjustment control. Pressing Up/Down on the ARROW KEYPAD will select

the desired gain setting.

QUIT Key— exits the current menu or conﬁ guration option. Returns the display to the previous page and,

when entering data, restores the previous data (cancels data entry).

MENU Key— from the sonar screen, displays the Adjustment Menu. Press again to access the Main Menu

for unit conﬁ guration.

ARROW KEYPAD— used to select (highlight) menu options and enter data. Also controls movement of the

cursor when paused in Pointer mode. Allows direct control of Sonar Page Adjustments.

RANGE Key— displays the Range adjustment control. Pressing Up/Down on the ARROW KEYPAD will

select the desired setting.

ENTER Key— selects a highlighted menu option. When entering data, it allows you to initiate entry and

then accept the selected value(s). When paused in Pointer mode, will create a waypoint at the Pointer posi-

tion (if equipped with compatible NMEA GPS).

POWER/BACKLIGHT Key— press and hold to turn the unit on and off. While the unit is on, pressing and

releasing will display the backlight control. Multiple presses of the POWER/BACKLIGHT key will toggle

the unit' s backlight between maximum, user-set, and minimum backlight brightness levels.

PAUSE Key— pauses the scrolling sonar display. When held for more than 2 seconds, enters Pointer mode.

Use the ARROW KEYPAD to move the cursor around the display to examine the depth of speciﬁ c items

in greater detail. If the Fishﬁ nder 320C is interfaced with a Garmin GPS or compatible NMEA navigation

device (pgs. 3-4), pressing the ENTER key in this state will send a WPL sentence to that device (if the cur-

rent position is known) creating a waypoint at that position. See pages 13 for more information.