Garmin GHP 10 Marine Autopilot System 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Garmin GHP 10 Marine Autopilot System에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GHP 10 Marine Autopilot System 21 페이지. Tachometer reference
Garmin GHP 10 Marine Autopilot System에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (48 페이지), 설치 지침 매뉴얼 (26 페이지), 기술 참조 (42 페이지), 적합성 선언 (1 페이지), 참조 (1 페이지)
페이지 인쇄
Using the GHC 10
Use the GHC 10 to engage and manually
steer the autopilot. In addition to steering
the autopilot, use the GHC 10 to begin
automatic steering functions and to
customize the autopilot.
Basic Operation
The Heading screen displays the status
of the autopilot and the heading. Use
the soft keys to engage the autopilot and
manually adjust the heading from the
Heading screen.
Understanding the Heading
Screen with the Autopilot in
Standby Mode
When you power the autopilot on, the
system starts in standby mode, with
the Heading screen displayed on the
GHC 10. When in standby mode, the
autopilot does not steer the boat—you
are responsible for the helm. When in
standby mode, the top of the Heading
screen displays "You Have The Helm"
in yellow, and your heading is shown in
the center.
When in standby mode, you can engage
the autopilot, adjust the settings from
the menu, or specify the transmission
direction of your boat (forward or
reverse) by using the soft keys.
Autopilot
status
Heading
Soft-key
functions
Heading Screen with
Autopilot in Standby
To engage the autopilot:
Press the soft key labeled Engage.
GHC 10 Quick Start Manual
Mode