Garmin GNS 530W 파일럿 매뉴얼 부록 - 페이지 19
{카테고리_이름} Garmin GNS 530W에 대한 파일럿 매뉴얼 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GNS 530W 24 페이지. For continued airworthiness bell 206b
Garmin GNS 530W에 대해서도 마찬가지입니다: 파일럿 매뉴얼 부록 (50 페이지), 파일럿 매뉴얼 부록 (50 페이지), 파일럿 매뉴얼 부록 (24 페이지), 보충 설명서 (12 페이지), 빠른 참조 (23 페이지), 빠른 참조 (25 페이지), 사용 설명서 (23 페이지)
페이지 인쇄
9900B (TCAD) Symbols
TRFC (White)—Altitude separa-
tion >500 feet, steady altitude
separation
TA (Yellow)—Altitude separa-
tion £500 feet, steady altitude
separation
TRFC (White)—Altitude separa-
tion >500 feet, closing
PA (White)—Altitude separa-
tion £500 feet, opening
TRFC (White)—Altitude separa-
tion >500 feet, opening
TA (Yellow)—Altitude separa-
tion £500 feet, closing
9900BX (TCAS) Symbols
Traffic Advisory
Proximity Advisory
Other Traffic
Out-of-Range Traffic Advisory
Configuring TCAD Data on the Map Page
The display of traffic information closely resembles
the display symbology used by the Ryan TCAD. Traf-
fic data is only displayed on the Map Page if head-
ing data is available.
You can configure TCAD data on the Map
Page using the Map Setup Menu.
To configure Traffic on the Map Page:
1.
Turn the small right knob to select the Map
Page.
Press MENU to display the Page Menu.
2.
3.
Use the small right knob to select "Setup
Map?" and press ENT.
4.
The flashing cursor highlights the GROUP field.
Turn the small right knob to display the Map
Setup Options Menu. Turn the small right
knob to select Traffic and press ENT.
Turn the large right knob to select the desired
5.
Traffic Mode option. Turn the small right knob
to select the desired option and press. Repeat
the step for Traffic Symbol and Traffic Label.
Return to the Map Page by pressing CLR.
6.
The Map Page has the ability to display traffic in
a thumbnail format in any of the top three fields (top
four fields on a 500W Series unit) on the right-hand
190-00356-31 Rev. C
Section 4
Ryan TCAD Interface
17