Alke Global-8 Series 사용자 및 설치 설명서 - 페이지 8

{카테고리_이름} Alke Global-8 Series에 대한 사용자 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alke Global-8 Series 17 페이지.

Soundness check

Before using a new built gas system, first make sure that the installer made a careful and extensive

check for gas leakage. After executing a pressure drop test to determine that there are not large leaks,

check every connection with soapy water or gas detection liquid with all gas valves open and with

maximum gas pressure. Pay special attention to the hose connections. Maintain maximum air ventilation

during the test. Repeat this check at least every year. This soundness check shall be done by a

competent installer only.

Gas leakage

When a gas leak is detected, immediately close the gas supply and disconnect electricity. Keep flames

away. Do not use the heater anymore. Contact an authorised gas technician, gas installer or gas service

agent to determine if the gas leakage can be repaired. Never try to do gas repairs by yourself. Do not

use the heater anymore until the problem is solved.

Version: April 2016

manual number: 0009 0440EN