Garmin GPS 400W 파일럿 매뉴얼 부록 - 페이지 6
{카테고리_이름} Garmin GPS 400W에 대한 파일럿 매뉴얼 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPS 400W 24 페이지. Garmin gps receiver quick reference guide
Garmin GPS 400W에 대해서도 마찬가지입니다: 파일럿 매뉴얼 부록 (50 페이지), 빠른 참조 (23 페이지), 파일럿 매뉴얼 부록 (24 페이지), 보충 설명서 (12 페이지), 빠른 참조 매뉴얼 (25 페이지)
페이지 인쇄
Section 2
L-3 Stormscope Interface
SECTION 2: L-3 STORMSCOPE INTERFACE
L-3 STORMSCOPE Description
NOTE: Refer to the WX-500 Pilot's Guide for a detailed
description of the WX-500 STORMSCOPE.
The L-3 STORMSCOPE WX-500 Weather Map-
ping Sensor is a passive weather avoidance system
that detects electrical discharges associated with
thunderstorms within a 200-NM radius of the aircraft.
The STORMSCOPE measures relative bearing and
distance of thunderstorm-related electrical activity and
reports the information to the display. Interfaces are
currently only available for the WX-500 STORM-
SCOPE System.
The 400W/500W Series units perform a self-
test during power-up to ensure proper opera-
tion of the applicable interface components.
Power-Up Self-Test
The power-up self-test ensures that the WX-500
functions are operating properly. An error message
is displayed on the Message Page if data is no longer
being received.
4
User-Initiated Test
In addition to the power-up test, the WX-500 per-
forms a continuous self-test. This continuous self-test
is performed several times per minute. A user-initiated
test can also be performed. The WX-500 Pilot' s Guide
lists all of the possible faults, probable causes, and
recommended actions if system failures are noted.
In addition to the power-up test, the user can
perform a self-test that is executed through
the 400W/500W Series unit display.
To perform a user-initiated test:
From the default Nav Page, turn the small
1.
right knob to select the Lightning (LTNG)
Page.
Press MENU to display the Page Menu.
2.
Turn the small right knob to select "Self-
3.
Test?" and press ENT.
190-00356-31 Rev. C