Garmin GPSMAP 2006 소유자 매뉴얼 - 페이지 15

{카테고리_이름} Garmin GPSMAP 2006에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 2006 20 페이지. Garmin gsd 20 marine-remote sounder: release note
Garmin GPSMAP 2006에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지), 적합성 선언 (1 페이지), 설치 매뉴얼 (2 페이지), 적합성 선언 (1 페이지), 설치 매뉴얼 (8 페이지)

페이지 인쇄

Getting Started

Main Page Sequence

Creating Waypoints

Name Field

Symbol Field

(up to 20 characters)

Distance and Direction

from Captured Location

Captured Location

The Simulator is now set up and ready to use!

Let's review what we have covered so far:

1. The PAGE and QUIT key will cycle through the Main Pages, the PAGE key in a forward direction and the

QUIT key in reverse.

2. To select a ﬁeld or option use the Right/Left and Up/Down functions of the ARROW KEYPAD to control

the cursor or highlight.

3. To activate a ﬁeld or option, place the highlight over the item and press ENTER/MARK .

4. Use the ARROW KEYPAD to scroll through alpha-numeric character lists when entering data.

Comment Field

Creating Waypoints

There will be many times that you will need to enter data in the GPSMAP 2006/2010, an example is

naming a waypoint. We have already taken a brief look at entering data, but let' s practice some more.

Through this exercise we will create a new waypoint, name the waypoint, and assign a symbol to the

waypoint. The term "Waypoint" may be new to you. You will ﬁnd the term "Waypoint" is used frequently

when talking about navigation. A "Waypoint" is a position stored in the unit' s memory, that can be used for

navigation. Waypoints are used for direct navigation or you can use several waypoints to build a route.

Creating, or "Marking" a waypoint in the 2006/2010 is really very easy. The unit has to be turned on

and receiving at least three satellite signals or in Simulator Mode to mark a waypoint.

Marking your present position as a Waypoint:

1. Press and hold the ENTER/MARK key (more than 1 second) until the 'New Waypoint' window is dis-

played.

When you hold the ENTER/MARK key, the GPSMAP 2006/2010 captures its current location and

Depth Field

displays the 'New Waypoint' window. You can see that the unit assigned a square as the default symbol

and a number as the default name. The 'OK' button is now highlighted. Pressing the ENTER/MARK key

will store the new waypoint using the default settings for the symbol and name, but let' s change them for

practice.

Changing the symbol:

1. Using the ARROW KEYPAD , highlight the symbol ﬁeld, then press the ENTER/MARK key. This will

display a list showing all of the available symbols.