Garmin GPSMAP 3005C 빠른 참조 매뉴얼
{카테고리_이름} Garmin GPSMAP 3005C에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 3005C 2 페이지. Declaration of conformity
Garmin GPSMAP 3005C에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (10 페이지), 템플릿 매뉴얼 (1 페이지), 빠른 참조 (2 페이지), 설치 지침 매뉴얼 (17 페이지), 적합성 선언 (1 페이지)
페이지 인쇄
Marking a Waypoint
To mark your current location:
1. Press and hold ENTER/MARK until the Review
Waypoint Page appears. The GPSMAP 3005C
captures your current location, and then creates a
default name and symbol for the new waypoint.
2. To accept the waypoint with the default information,
press ENTER, or to change any waypoint information,
highlight the appropriate field and press ENTER.
To create a ne�� ��aypoint from a map feature:
create a ne�� ��aypoint from a map feature:
1. Use the map pointer to highlight a map feature.
2. Press and release ENTER/MARK to capture the
pointer location and open the Review Page.
3. Press the Create Wpt soft key to open the Review
Waypoint Page.
4. To accept the waypoint with the default information,
press ENTER, or to change any waypoint information,
highlight the appropriate field and press ENTER.
Navigating to a Destination
To navigate to a destination
NAV
1. Press
to access the Navigation menu.
2. Highlight Go To Point, Follo�� Route, Follo�� Track, or TracBack, and press ENTER.
3. Use the ROCKER to highlight a point, track, or route from the list, and press ENTER.
4. If you selected a point, press the Go To soft key. If you selected a route or saved track,
choose from the selections, and press ENTER.
5. Follow the magenta route created on the Map Page. You can also use the Compass Page
to help you navigate.
Navigation Menu
Navigation Sho��n on the Map Page
To find an item from your current location:
1. From any page, press FIND to open the Find From Current Position Page.
2. Highlight a category, and press ENTER. For some categories, you might need to
select multiple subcategories.
3. Highlight an item in the search results list, and press ENTER. The Review Page
appears showing item information, map location, chart name, distance/bearing, and
options for creating a waypoint or viewing the next item in the search results list.
Revie�� Waypoint Page
Find From Current Position Page
Revie�� Map Point
Using the MOB (Man OverBoard) Feature
The Man OverBoard function (MOB) simultaneously marks and sets a course back to the
marked location for quick response to emergency situations.
To start the MOB function:
1. Press and hold NAV/MOB. A message
appears asking you if you want to begin
navigation to the MOB waypoint.
2. Press ENTER to begin navigating to the
MOB location.
3. To stop navigation to the MOB location, press
NAV, highlight Stop Navigation, and press
ENTER.
To stop navigation to the MOB location:
1. Press NAV/MOB.
2. Highlight Stop Navigation, and press ENTER.
Finding an Item
Revie�� Waypoint Page
Man OverBoard
GPSMAP
3005C
®
quick reference guide