Garmin Gpsmap 430 - marine gps receiver 파일럿 매뉴얼 - 페이지 9
{카테고리_이름} Garmin Gpsmap 430 - marine gps receiver에 대한 파일럿 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Gpsmap 430 - marine gps receiver 22 페이지. Flush mount template
Garmin Gpsmap 430 - marine gps receiver에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지), 빠른 참조 매뉴얼 (2 페이지), 참조 매뉴얼 (2 페이지), 적합성 선언 (1 페이지), 설치 지침 매뉴얼 (30 페이지), 템플릿 (1 페이지), 기본 작업 (4 페이지)
페이지 인쇄
Worksheet – COM and VLOC Operation
After reviewing the GNS 430 or GNS 530 Pilot' s Guide, complete the following exercises using the Garmin 400 or 500
series PC simulation device.
Exercise 1
Use the simulation device to manually tune the COM radio to the CTAF of 122.7 and make it the active frequency.
Next, tune the VLOC to the VOR frequency 114.0 and make it the active frequency. Also, set the unit so that the external
CDI is tracking the tuned VOR instead of GPS.
Exercise 2
For this exercise, initialize the simulation device position to KMKC (Wheeler Downtown, Kansas City, MO). After the
position is initialized, use the Nav 3 page (400/500 series trainer) to find the ATIS frequency for KMKC and automatically
tune the COM radio. Make the ATIS frequency active. Next, tune the Ground frequency in the same manner.
Exercise 3
For this exercise, initialize the simulation device position to KMKC (Wheeler Downtown, Kansas City, MO). After the
position is initialized, locate the Nearest VOR page. From the Nearest VOR page, find ANX (Napoleon) and automatically
tune the VLOC receiver to it. Make ANX the active frequency and ensure that the external CDI is set to track the VOR.
Exercise 4
Use the simulation device to automatically tune the COM radio to the Tower or CTAF frequency of your home airport,
using the database without using the Nearest page.
190-00334-00 Rev. A
HOME STUDY
GNS 530/430 Home Study 3
Garmin GNS 530/430 Sample Training Syllabus and Flight Lessons
5