alkitronic XE Series 운영 및 유지보수 매뉴얼 - 페이지 10

{카테고리_이름} alkitronic XE Series에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. alkitronic XE Series 16 페이지. Battery powered torque multiplier

페이지 인쇄

Operating and service manual

Function and operation test

7.1

Visual and mechanical inspection

Battery packs, charger station, operating and dis-

play elements, case and accessories, such as e.g.

the torque brace DMA must be regularly inspected

for damages and must be replaced professionally

if necessary.

Keep ventilation opening unobstructed. Soiled or

blocked ventilation openings can cause malfunc-

tion and damage to the motor.

In case of reduced power, strong gear noise or

obvious severe damage an immediate repair is

necessary. Please send all devices to be repaired in

their original packaging to your nearest alkitronic®

partner or to alki TECHNIK GmbH.

Servicing / storage / maintenance

8.1

Replacing accessories

See 4.2 Preparation for bolting – Follow steps in the

opposite direction.

8.2

Storage in lockable containers

Store alkitronic® EAF and the charger station in a

dry and cooled off state in the original case, or any

other closable container. Heat and damp lead to

oxidation of the gear and other components inside

the case. The consequences are malfunctioning,

damages to the electronic circuitry and motor.

Ensure that also during storage the power cable

of charger station is not squeezed in anywhere or

damaged in any way.

Notes for the alkitronic® Li-Ion rechargeable battery pack

Always remove the battery pack from the power

tool when not in use. Do not touch or short the con-

tacts! Although the electronic circuitry will protect

the battery packs against complete discharging, a

long life is best ensured by maintaining a sufficient

charge in the battery pack.

LED display

on the

battery pack

In order to maintain the battery pack in a fully char-

ged a trickle charge of about 70 to 75% is required

(see illustration above).

8.3.

Decommissioning

If the alkitronic® tools and devices are not used over

an extended period of time they should be cleaned

and stored in a dry and closable space not accessible

to children. The optimum storage temperature is

between 10° and 30°C. Rotating components must

be protected against oxidation (see pos. 8.2).

8.4

Service and maintenance

The alkitronic® EAF torque multiplier is an extremely

powerful and robust product. To ensure a long life

and reliability over many years the machine must

be serviced in regular intervals (performance check,

motor check, safety inspection, calibration service).

Service intervals

The power tool must be inspected at least once per

year. In case of high usage or strain as well as many

operating hours servicing and calibration will be

necessary more frequently. In case of unusual gear

noises a lubrication of the gears is urgently recom-

mended to prevent subsequent damages.

alkitronic® EAF torque multipliers must always be

packed in the original packaging when sent to your

alkitronic® partner or alki TECHNIK GmbH.

Technical notes

9.1

Safety shut-off general

In order to prevent faulty boltings and / or dam-

ages to the power tool the alkitronic® EAF torque

multiplier is fitted with a multi-functional moni-

toring system.

If the machine switches itself off then the electronic system

has activated the self-protection mode. There is an acoustic

warning (30 second tone or until the push button (D) is re-

leased) (Fig. 3).

Fig. 3

Fig. 4