Garmin GPSMAP 451 설치 지침 매뉴얼 - 페이지 2

{카테고리_이름} Garmin GPSMAP 451에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 451 28 페이지. Flush mount kit instructions (multilingual)
Garmin GPSMAP 451에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지), 참조 매뉴얼 (2 페이지)

페이지 인쇄
Garmin GPSMAP 451 설치 지침 매뉴얼
3. Install the unit in the opening (see Figure 2):
•
Place the unit housing in the recently cut hole in the mounting surface.
•
Slide the tension mount arms onto the hex bolts and secure them with the (4) wing nuts.
•
Tighten the (4) wing nuts to secure the unit housing to the mounting surface. Be careful not to overtighten.
Assembled unit and
flush mount hardware
NOTE: If you are installing a Fishfinder 400C, the wiring harness must be connected to the boat's power supply and transducer per the installation
instructions included with the unit.
NOTE: If you are installing a GPSMAP 400 series unit, you must connect the wiring harness to the boat's power supply, GPS antenna, XM antenna
(if applicable), and transducer (if applicable) per the installation instructions included with the unit.
Tension mount brackets
Figure 2
Wing nuts