Garmin GPSMAP 478 - Marine GPS Receiver 빠른 참조 매뉴얼
{카테고리_이름} Garmin GPSMAP 478 - Marine GPS Receiver에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 478 - Marine GPS Receiver 2 페이지. Flush mount template
Garmin GPSMAP 478 - Marine GPS Receiver에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 템플릿 (1 페이지)
페이지 인쇄
Where To
To find a marine service from your current location:
1.
From the Home screen, select Where
To.
2. Select the marine service category to which you want to navigate. The unit shows the list of
the 50 nearest locations and the distance to each.
3. Select the marine service item to which you want to navigate. A screen containing
information about the selected marine service appears.
4.
Select Navigate
To.
5.
Select Go To or Route
To.
OR
Select Guide
To when using a preprogrammed BlueChart g2 Vision
card to use Auto Guidance.
6. Follow the colored line on the screen to the destination.
To stop navigating:
Press MENU, and then select Stop
Navigating.
To search for a destination by name:
1.
From the Home screen, select Where To > Search by
Name.
2. Press up or down on the ROCKER to select a number or character; press left or right to
move fields.
3. Press SELECT to view the 50 nearest destinations that contain your search criteria.
Creating and Using Waypoints
When you create a waypoint, you can designate it as an MOB (Man OverBoard). This marks
the point and sets a course back to the marked location. When an MOB is active, an MOB
waypoint with an international MOB symbol is created and the unit is on an active navigation
to that point.
To mark your location:
1. From any screen, press MARK.
2. Select Back to return to the chart, or select MOB (Man OverBoard) to designate the
waypoint as an MOB point.
To create a new waypoint:
1. Move the map pointer to the location you want and press
SELECT.
2. Select
Create
Waypoint.
3. Select one of the following:
•
Edit
Waypoint—customize the waypoint attributes.
•
Delete—delete the waypoint.
•
Navigate
To—go to the waypoint.
•
Back—return to the navigation chart.
To edit a waypoint:
1. Create a new waypoint or select a waypoint on the navigation
chart.
2.
Select Edit
Waypoint.
3. Select the waypoint attribute you want to change (Name, Symbol,
Depth, Water
Temp, or Position).
To move the waypoint on the navigation chart:
Select Edit Waypoint > Position > Use
Chart.
To view a list of all waypoints:
Data > Waypoints.
From the Home screen, select Information > User
Please visit
www.garmin.com
for additional documentation and information.
GPSMAP
400/500 Series
®
quick reference guide