Garmin GPSMAP 500 Series 파일럿 매뉴얼 - 페이지 23

{카테고리_이름} Garmin GPSMAP 500 Series에 대한 파일럿 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 500 Series 28 페이지. Flat-mount kit
Garmin GPSMAP 500 Series에 대해서도 마찬가지입니다: 사용 설명서 (6 페이지), 파일럿 매뉴얼 부록 (27 페이지), 빠른 참조 매뉴얼 (2 페이지), 참조 매뉴얼 (2 페이지), 사용 설명서 (28 페이지), 템플릿 (2 페이지), 템플릿 (1 페이지), 구성 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (4 페이지), 소유자 매뉴얼 (38 페이지), 소유자 매뉴얼 (44 페이지), 설치 지침 매뉴얼 (34 페이지), 빠른 참조 매뉴얼 (2 페이지)

Monitoring Trafﬁc

Refer to the information in the TCAD Pilot' s Guide

regarding monitoring trafﬁc on the display and the

corresponding actions to take.

Highlighting Trafﬁc Data Using Map Panning

Panning is another map page function, which allows

moving the map beyond its current limits without

adjusting the map scale. Select the panning function—by

pressing the small right knob—a target pointer ﬂashes on

the map display. Also a window also appears at the top of

the map display showing the latitude/longitude position

of the pointer, and the bearing and distance to the pointer

from the present position.

When the target pointer is placed on trafﬁc, the trafﬁc

range, altitude separation, squawk code (if available), and

tail number (if available) are displayed (Figure 4-4).

190-00140-10 Rev. E

Panning the map:

Press the small right knob to activate the

panning target pointer (Figure 4-4).

Turn the small right knob to move up (turn

clockwise), or down (turn counterclockwise).

Turn the large right knob to move right (turn

clockwise), or left (turn counterclockwise)

Press the small right knob to cancel map

panning and return to the present position, .

The trafﬁc is identiﬁed as follows:

• TA: Trafﬁc Advisory—This is trafﬁc within 500

ft. of altitude separation that is converging or

maintaining altitude separation.

• PA: Proximity Advisory—This is trafﬁc within 500

ft. of separation and it is not a TA.

• TRFC:—Other trafﬁc

400/500 Series Display Interfaces

SECTION 4

RYAN TCAD INTERFACE

Figure 4-4 Panning the Map Page

4-3