Garmin GPSMAP 5015 설치 지침 매뉴얼 - 페이지 18

{카테고리_이름} Garmin GPSMAP 5015에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 5015 25 페이지. Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
Garmin GPSMAP 5015에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 소유자 매뉴얼 (2 페이지), 설치 지침 매뉴얼 (25 페이지), 빠른 참조 매뉴얼 (2 페이지), 안전 및 제품 정보 (48 페이지), 기술 참조 (42 페이지), 제품 정보 (48 페이지), 적합성 선언 (1 페이지), 매립형 마운트 템플릿 (2 페이지), 보충 설명서 (24 페이지)

페이지 인쇄
Garmin GPSMAP 5015 설치 지침 매뉴얼
Wiring to an optional Alarm
The GPSMAP 4000/5000 series chartplotter can be used with a lamp, a horn, or both, to sound or flash an alert when the chartplotter displays a
message. The alarm does not need to be wired for the GPSMAP 4000/5000 chartplotter to function. The alarm circuit switches to a low-voltage
state when the alarm sounds. The maximum current is 100 mA, and a relay is needed to limit the current from the chartplotter to 100 mA. To
select between visual and audible alerts, install a switch.
Garmin
GPSMAP 4000/5000 series
chartplotter

Wiring to a DB-9 PC Serial Connector

The GPSMAP 4008/4208/4010/4210/4012/4212/5008/5208/5012/5212 chartplotters can be connected to a PC with a serial port by wiring the
chartplotter to a DB-9 serial connector.
Garmin
GPSMAP 4000/5000 series
chartplotter
18
FuSE
7.5 A - 42 V
PoWEr
CABLE
nMEA 0183
CABLE
Wiring to a lamp, a horn, or both.
WIrE
SEE tABLE For
WIrE CoLorS
FuSE
7.5 A - 42 V
rED (PoWEr)
PoWEr
BLACk (PWr GnD)
CABLE
BLACk (DAtA GnD)
rX / B(-)
>
nMEA 0183
CABLE
rX / A(+)
>
tX / A(+)
>
tX / B(-)
>
Wiring to a DB-9 Serial PC Connector
+
-
BAttErY
10–35 Vdc
WIrE
CoLor
rED (PoWEr)
BLACk (GnD)
rELAY
YELLoW (ALArM)
100 mA MAX
CoIL CurrEnt
-
+
BAttErY
10–35 Vdc
DB-9 PIn
nuMBErS
PIn 5: GnD
PIn 3: tX
PIn 2: rX
unConnECtED
GPSMAP 4000/5000 Series Installation Instructions
Horn
LAMP
DB-9 Serial
PC Connector
6
2
7
3
8
4
9
5
>
>
End View