alkitronic H-AX 운영 및 유지보수 매뉴얼 - 페이지 9

{카테고리_이름} alkitronic H-AX에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. alkitronic H-AX 16 페이지. Hydraulic torque wrench

Fig. 3

Reaction support surface (1)

Support position correct/incorrect alkitronic® H-AX.

Description of supports Fig. 4:

(1) Correct support!

(2) Reaction surface too small and out of the sup-

port area.

(3) Tilted reaction support out of the support area

- high hazard potential - must be strictly avoided!

(4) Punctual loadings or sharp-edged counter

mountings may cause damages to the housing.

Fig. 4 - Examples correct / incorrect support

Dangerous tipping can be caused by the bolting

connection and Torque Wrench being at different

heights. For this situation, reduce the maximum

torque of the wrench. Before starting work, ask

your alkitronic® Partner or alki TECHNIK GmbH for

safe solutions.

H-AX / H-AT

3.5.2 Positioning the DMA - alkitronic® H-AX (option)

Depending on the application a DMA - Extended Reaction

Arm (5) - can also be used.

hydraulic torque wrenches

Depress the short standard link bolt (3) and insert the

DMA (6) correctly. Then attach the longer link bolt (7)

to secure the DMA with the H-AX drive unit and the

H-AX hexagon link.

Standard - Link Bolt

short version (3)

Professional positioning of the alkitronic® DMA is

dependent on the joint.

Also see Fig. 4 - correct/incorrect support points.

Link Bolt

long version (7)

DMA (6) Example

„Low Point Reaction Arm"

DMA (5) Example

Extended Reaction Arm