Garmin GPSMAP 5212 - Marine GPS Receiver 설치 지침 매뉴얼 - 페이지 12

{카테고리_이름} Garmin GPSMAP 5212 - Marine GPS Receiver에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 5212 - Marine GPS Receiver 19 페이지. Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
Garmin GPSMAP 5212 - Marine GPS Receiver에 대해서도 마찬가지입니다: 중요 안전 정보 (4 페이지), 빠른 참조 매뉴얼 (2 페이지), 소유자 매뉴얼 (2 페이지), 소유자 매뉴얼 (2 페이지), 기술 참조 (30 페이지), 설치 지침 매뉴얼 (25 페이지), 빠른 참조 매뉴얼 (2 페이지), 설치 지침 매뉴얼 (25 페이지), 적합성 선언 (1 페이지), 인쇄 매뉴얼 (2 페이지), 보충 설명서 (24 페이지), 사용자 설명서 (6 페이지)

페이지 인쇄
Garmin GPSMAP 5212 - Marine GPS Receiver 설치 지침 매뉴얼
Wiring to an Optional Alarm
The GPSMAP 4000/5000 series unit can be used with a lamp, a horn, or both, to sound or flash an alert when the unit displays a message. The
alarm does not need to be wired for the 4000/5000 unit to function. The alarm circuit pulls low when the alarm sounds. The maximum current is
100 mA, and a relay is needed to limit the current from the unit to 100 mA. A switch can be installed to select between visual and audible alerts.
Garmin
GPSMAP 4000/5000
Series Unit

Wiring to a DB-9 PC Serial Connector

The GPSMAP 4000/5000 series unit can be connected to a PC with a serial port by wiring the unit to a DB-9 serial connector.
Garmin
GPSMAP 4000/5000
Series Unit
FUSE
7.5A - 42V
POWER
CABLE
NMEA 0183
CABLE
Wiring to a lamp, a horn, or both.
WIRE
SEE TABLE FOR
WIRE COLORS
FUSE
7.5A - 42V
RED (POWER)
POWER
BLACK (PWR GND)
CABLE
BLACK (DATA GND)
RX / B(-)
>
NMEA 0183
CABLE
RX / A(+)
>
TX / A(-)
>
TX / B(+)
>
Wiring to a DB-9 Serial PC Connector
+
BATTERy
10-35 VDC
WIRE
COLOR
RED (POWER)
BLACK (GND)
RELAy
yELLOW (ALARM)
100 mA MAX
COIL CURRENT
-
+
BATTERy
10-35 VDC
DB-9 PIN
NUMBERS
PIN 5: GND
PIN 3: TX
PIN 2: RX
UNCONNECTED
GPSMAP 4000/5000 Series Installation Instructions
-
HORN
LAMP
DB-9 Serial
PC Connector
2
3
4
5
>
>
End View
6
7
8
9