AEG ProCombi BS9304001 사용자 설명서 - 페이지 18
{카테고리_이름} AEG ProCombi BS9304001에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG ProCombi BS9304001 36 페이지. Oven
AEG ProCombi BS9304001에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지), 사용자 설명서 (36 페이지), 사용자 설명서 (48 페이지), 사용자 설명서 (48 페이지)
페이지 인쇄
18
Using the accessories
With some programmes, turn over the food after 30 minutes. The display shows a reminder.
USING THE ACCESSORIES
WARNING!
Refer to "Safety information" chapter.
Core temperature sensor
The core temperature sensor measures the core temperature of the meat. When the meat
reaches the set temperature, the appliance deactivates automatically.
You have to set:
• The appliance temperature
• The core temperature
Use only original parts. It ensures the best cooking result.
Using the core temperature sensor:
1.
Put the tip of the core temperature sensor into the centre of the meat.
2.
Activate the appliance.
3.
Put the plug of the core temperature sensor into the socket on the right-upper side of
the cavity front.
The display shows the core temperature sensor.
4.
Use the shuttle in less than 5 seconds to set the core temperature.
5.
Set the heating function and, if necessary, the temperature.
The appliance calculates an approximate end time. The end time varies for different
quantities of food, the set temperatures (minimum 120°C) and the operating modes.
The appliance calculates the end time in approximately 30 minutes.
The core temperature sensor must stay in the meat and in the socket during the cooking
process.