AEG ProCombi BS9304001 사용자 설명서 - 페이지 22
{카테고리_이름} AEG ProCombi BS9304001에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG ProCombi BS9304001 36 페이지. Oven
AEG ProCombi BS9304001에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지), 사용자 설명서 (36 페이지), 사용자 설명서 (48 페이지), 사용자 설명서 (48 페이지)
페이지 인쇄
22
Care and cleaning
3.
Press
4.
Set the time.
5.
Press
Press OK to confirm.
6.
To start SET + GO, press any sensor field (except for
When the heating function ends, an acoustic signal sounds.
When the heating function operates, the function Control Lock is on.
You can activate and deactivate the SET + GO function in the Basic Settings menu.
Automatic switch-off
For safety reasons the appliance deactivates automatically after some time:
• If a heating function operates.
• If you do not change the temperature.
The Automatic switch-off works with all functions, except Light , Duration , End Time and
Core Temperature Sensor.
Cooling fan
When the appliance operates, the cooling fan activates automatically to keep the surfaces
of the appliance cool. If you deactivate the appliance, the cooling fan can continue to oper-
ate until the appliance cools down.
CARE AND CLEANING
WARNING!
Refer to "Safety information" chapter.
Notes on cleaning:
• Clean the front of the appliance with a soft cloth with warm water and cleaning agent.
• To clean metal surfaces use a usual cleaning agent.
• Clean the appliance interior after each use. Then you can remove dirt more easily and it
does not burn on.
• Clean stubborn dirt with a special oven cleaner.
• Clean all accessories (with a soft cloth with warm water and cleaning agent) after each
use and let them dry.
• If you have nonstick accessories, do not clean them using an aggressive agents, sharp
edged objects or dishwasher. It can cause a damage to the nonstick coating.
again and again until the display shows Duration .
again and again until the display shows SET + GO .
Temperature
30 °C - 120 °C
120 °C - 200 °C
200 °C - 230 °C
). The set heating function starts.
Switch-off time
12.5 h
8.5 h
5.5 h