AEG ProCombi BS9304001 사용자 설명서 - 페이지 21
{카테고리_이름} AEG ProCombi BS9304001에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG ProCombi BS9304001 36 페이지. Oven
AEG ProCombi BS9304001에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지), 사용자 설명서 (36 페이지), 사용자 설명서 (48 페이지), 사용자 설명서 (48 페이지)
페이지 인쇄
If the appliance has the Pyrolytic cleaning function, the door is locked.
Deactivating the Control Lock :
1.
Press
2.
Press OK to confirm.
Child Lock
The Child Lock function prevents an accidental operation of the appliance.
Activating and deactivating the Child Lock function:
1.
Activate the appliance.
2.
Touch
If the appliance has the Pyrolytic cleaning function, the door is locked.
A message comes on in the display when you turn the shuttle or touch a sensor field.
SET + GO
The SET + GO function lets you set a heating function (or programme) and use it later with
one press of the sensor field.
Activating the function:
1.
Activate the appliance.
2.
Set the heating function.
3.
Press
4.
Set the time.
5.
Press
6.
Press OK to confirm.
To start SET + GO, press any sensor field (except for
When the heating function ends, an acoustic signal sounds.
When the heating function operates, the function Control Lock is on.
You can activate and deactivate the SET + GO function in the Basic Settings menu.
Automatic switch-off
For safety reasons the appliance deactivates automatically after some time:
• if an heating function operates.
• if you do not change the temperature.
.
and
at the same time until the display shows a message.
again and again until the display shows Duration .
again and again until the display shows SET + GO .
Appliance temperature
30 °C -120 °C
120 °C - 200 °C
200 °C -230 °C
Additional functions
). The set heating function starts.
Switch-off time
12.5 h.
8.5 h.
5.5 h.
21