AEG PROCOMBI PLUS BS7304001 사용자 설명서 - 페이지 20
{카테고리_이름} AEG PROCOMBI PLUS BS7304001에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG PROCOMBI PLUS BS7304001 48 페이지.
페이지 인쇄20
www.aeg.com
1
2
3
4
5
6
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
1. When the appliance is deactivated,
touch and hold
The display shows SET1 and "1" flashes.
2. Touch
3. Touch
4. Touch
of the setting.
5. Touch
10.5 Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some
time if an oven function operates and
you do not change any settings.
Temperature
30 °C - 115 °C
120 °C - 195 °C
200 °C - 230 °C
After the Automatic switch-off, touch a
sensor field to operate the appliance
again.
You can deactivate the
appliance when the Function
Lock is on. When you
deactivate the appliance,
the Function Lock
deactivates.
Description
SET + GO
RESIDUAL HEAT INDICATOR
1)
KEY TONE
FAULTY TONE
SERVICE MENU
RESTORE SETTINGS
for three seconds.
or
to set the setting.
.
or
to change the value
.
Switch-off time
12.5 h
8.5 h
5.5 h
10.4 Using the settings menu
You can set the settings menu only when
the appliance is deactivated.
The settings menu lets you activate or
deactivate functions in the main menu.
The display shows SET and the number
of the setting.
Value to set
ON / OFF
ON / OFF
CLICK / BEEF / OFF
ON / OFF
-
ON / OFF
The Automatic switch-off
does not work with the
functions: Core temperature
sensor, Light, Slow Cooking,
Duration, End, Time delay.
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back
to the day brightness mode for
the next 10 seconds.
– if the appliance is deactivated and
you set the Minute Minder. When
the Minute Minder function ends,
the display goes back to the night
brightness.