Garmin GPSMAP 6000 Series 빠른 참조 매뉴얼 - 페이지 2

{카테고리_이름} Garmin GPSMAP 6000 Series에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 6000 Series 2 페이지. Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
Garmin GPSMAP 6000 Series에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (21 페이지), 구성 매뉴얼 (2 페이지), 보충 설명서 (24 페이지), 소유자 매뉴얼 (8 페이지)

Garmin GPSMAP 6000 Series 빠른 참조 매뉴얼
Turning the Chartplotter On or Off
WARNING
See the Important Safety and Product Information guide in the product box for product
warnings and other important information.
Turning On the Chartplotter
Press and release the
Power
key.
Turning Off the Chartplotter
Press and hold the
Power
key.
Marking a Waypoint or an MOB Location
Marking Your Present Location as a Waypoint
From the Home screen, select Mark.
Creating a Waypoint at a Different Location
1. From the Home screen, select
Information
>
User Data
Move.
2. Indicate the location of the waypoint:
Use Chart
Select
to move the waypoint while viewing a chart. For the GPSMAP 6000
series, use the Rocker to select a new location on the chart. For the GPSMAP 7000
series, touch a new location on the chart. Select
Move
Select
enter Position
to move the waypoint using coordinates. For the GPSMAP 6000
series, use the Rocker to enter the coordinates of the new location. For the GPSMAP
7000 series, use the on-screen keyboard. Select Done.
Marking and Navigating to an MOB Location
When you mark a waypoint, you can designate it as a
man overboard (MOB) location.
From any screen, select
Mark
>
Man
overboard.
An international MOB symbol marks the active
MOB point and the chartplotter sets a course back to
the marked location using the Go To feature.
Adjusting the Backlight and the Color Mode
Adjusting the Backlight
1. From the Home screen, select
Backlight.
2. Adjust the backlight:
Select
Auto
ambient light.
Select
Up
Adjusting the Color Mode
1. From the Home screen, select
Day
2. Select
Selecting a Combination
1. From the Home screen, select Combinations.
2. Select a combination.
>
Waypoints
>
New Waypoint
>
Customizing the Combinations Screen
Note: You can choose from only the options available to your chartplotter. To increase the
number of screens available, use a BlueChart g2 Vision data card or add network devices such
as sonar and radar.
1. From the Home screen, select Combinations.
Waypoint.
2. Select a combination.
Menu
3. Select
4. Complete an action:
Select
Functions
number of combination screens.
Select a number.
Select
Layout
the screens in a vertical layout.
Select
Layout
the screens in a horizontal layout.
Data Bar
Select
Select a numbered option, such as 1. Nav Chart or 2. Sonar in the image above, to
change the type of information shown in the corresponding screen.
Man Overboard
5. Select Done.
Configure
>
System
>
Beeper/Display
>
to allow the chartplotter to adjust the backlight automatically, based on
or
Down
to adjust the backlight manually.
Configure
System
Beeper/Display
>
>
>
Colors,
Night
Colors, or Auto.
Using Combinations Screens
Change
Combination.
>
to select the
Combination
screen 1
Combination
>
Vert.
to arrange
screen 2
Data bar
>
Horiz.
to arrange
on
>
to show the horizontal bar that contains the data fields.
Navigating to a Marine Service
Navigating to a Marine Services Destination
Backlight
>
The Auto Guidance feature of the BlueChart g2 Vision data card is based on electronic chart
information. That data does not assure obstacle and bottom clearance. Carefully compare the
course to all visual sightings and avoid any land, shallow water, or other obstacles that may be
in your path.
When using Go To, a direct course and a corrected course may pass over land or shallow water.
Use visual sightings and steer to avoid land, shallow water, and other dangerous objects.
Note: Auto Guidance is available with a preprogrammed BlueChart g2 Vision data card.
Color
Mode.
1. From the Home screen, select
2. Select the marine service category to which you want to navigate.
The chartplotter shows a list of the 50 nearest locations and the distance and bearing to each.
3. Select a destination.
tIP: Select
Next Page
to view additional information or to show the location on a chart.
4. Select
Navigate
to.
5. Complete an action:
Select
Go to
to navigate directly to the location.
Select
Route to
to create a route to the location, including turns.
Select
Guide to
to use Auto Guidance.
6. Review the course indicated by the magenta line.
Note: When using Auto Guidance, a gray line within any part of the magenta line indicates
that Auto Guidance cannot calculate part of the Auto Guidance line. This is due to the
minimum safe water depth and the minimum safe obstacle height settings.
7. Follow the magenta line, steering to avoid land, shallow water, and other obstacles.
Go to
www.garmin.com
Garmin
, the Gamin logo, GPSMAP
®
Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be
used without the express permission of Garmin.
© 2009 Garmin Ltd. or its subsidiaries
November 2009
CAUTION
Where to?
>
offshore
Services.
for additional documentation and information.
, BlueChart
, and g2 Vision
are trademarks of Garmin
®
®
®
Part Number 190-01120-01 Rev. A
Printed in Taiwan