Garmin GPSMAP 640 매뉴얼 - 페이지 12

{카테고리_이름} Garmin GPSMAP 640에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 640 24 페이지. Garmin gps receiver user manual
Garmin GPSMAP 640에 대해서도 마찬가지입니다: 설치 지침 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 적합성 선언 (6 페이지), (빠른 참조 가이드 (2 페이지), (이탈리아어) 빠른 참조 매뉴얼 (2 페이지)

Marine Mode: Using XM WX Weather and Audio

• Select Previous Forecast to view the forecast visibility for the

previous 12 hours, and select Previous Forecast again to view

forecasts for the previous 24 and 36 hours, in 12-hour increments.

Viewing Buoy reports

Report readings are taken from buoys and coastal observation stations.

These readings are used to determine air temperature, dew point, water

temperature, tide, wave height and period, wind direction and speed,

visibility, and barometric pressure.

1. From the Home screen, select Weather > Forecast.

2. Select a buoy

3. Select Review > Buoy. (Review does not appear if the cursor is not

near an object. If the cursor is near only one object, the name of the

buoy appears.)

Forecast information appears when an area near a buoy is selected.

1. From the Home screen, select Weather > Forecast.

2. Complete an action:

• Touch a location on the chart.

• Touch and drag the screen to pan to a new location. Touch a

location on the chart.

3. Select Local Weather.

4. Complete an action:

• Select Current Cond. to view present weather conditions from a

local weather service.

• Select Forecast to view a local weather forecast.

• Select Sea Surface to view surface wind and barometric pressure

information.

• Select Marine Bulletin to view wind and wave information.

1. From the Home screen, select Weather > Forecast.

2. Complete an action:

• Touch a location on the chart.

• Touch and drag the screen to pan to a new location. Touch a

location on the chart.

3. Select Create Waypoint.

4. If you want to name the waypoint or provide information about it,

select the waypoint on the right side of the screen and select edit

Waypoint.

• Select Name, enter the name, and select Done.

• Select Symbol, and enter a symbol.

• Select Depth, enter the depth, and select Done.

• Select Water temp, enter the water temperature, and select Done.

• Select Comment, enter the comment, and select Done.

GPSMAP 640 XM WX Satellite Weather and XM Satellite Radio Supplement