Garmin GPSMAP 7015 설치 지침 매뉴얼 - 페이지 16

{카테고리_이름} Garmin GPSMAP 7015에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 7015 21 페이지. Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
Garmin GPSMAP 7015에 대해서도 마찬가지입니다: 소유자 매뉴얼 (2 페이지), 기술 참조 (42 페이지), 중요 안전 정보 (48 페이지), 적합성 선언 (6 페이지), 템플릿 매뉴얼 (2 페이지), 보충 설명서 (24 페이지)

페이지 인쇄

Installing video Cables

The GPSMAP 6000/7000 series chartplotters allow video input and monitor output using the included marine video 17-pin cable. The

GPSMAP 7015/7215 chartplotters have a second marine video 17-pin cable to allow for additional video sources. The GPSMAP 6000/7000

series chartplotters allow for National Television System Committee (NTSC) and Phase Alternate Line (PAL) composite video sources, and PC

monitor output (6008/6208 = VGA output, 6012/6212/7012/7212/7015/7215 = XGA output). The marine video cable inputs are only available

on the chartplotter to which they are attached and will not transmit over the Garmin Marine Network. For detailed marine video pinout

information, see the appendix

Primary video Cable (video—Yellow Connector)

This cable is supplied with all GPSMAP 6000/7000 series chartplotters, and connects to the yellow video connector on the back of the

chartplotter. This cable allows for two separate composite video sources and it allows for video output to an external PC monitor.

➊

Video 1 and Video 2 inputs (RCA connectors) allow input from two separate NTSC/PAL compatible composite video devices, such as a

VCR, a DVD player, a TV, or a video camera. The chartplotter can display one video input at a time or alternate between the two. See the

GPSMAP 6000/7000 Series Owner's Manual for details. Sound from a video source must be attached to a separate stereo/audio system.

➋

Use the PC monitor output (HD 15-pin) connector for remote viewing of the chartplotter display on a computer monitor. The remote

monitor must be capable of at least VGA resolution and have multi-sync capability. Ensure that the ground of the connected monitor is

connected to the same ground as the GPSMAP 6000/7000 series chartplotter to avoid interference.

Secondary video Cable (video 2—Purple Connector)

This cable is supplied with the GPSMAP 7015/7215 chartplotters, and it is not compatible with any other GPSMAP 6000/7000 series

chartplotter. This cable connects to the purple connector on the back of the GPSMAP 7015/7215 chartplotter, and it allows two additional

composite video sources, an S-Video source, and PC VGA input.

➌

Video 3 and Video 4 inputs (RCA connectors) allow two NTSC/PAL compatible composite video devices, such as a VCR, a DVD player,

a TV, or a video camera. The GPSMAP 7015/7215 chartplotter can display up to four video inputs at a time, or it can cycle through all

connected video inputs. See the GPSMAP 6000/7000 Series Owner's Manual for details. Sound from a video source must be attached to a

separate stereo/audio system.

➍

Connect a computer to the PC monitor input (HD 15-pin) connector to use the GPSMAP 7015/7215 chartplotter as a computer monitor. See

the GPSMAP 6000/7000 Series Owner's Manual for details.

➎

S-Video input (S-Video connector) allows input of NTSC/PAL compatible S-Video devices, such as a VCR, a DVD player, a TV, or a video

camera. An S-Video connection provides a higher-quality video signal than a composite video connection.

(page

19).

Secondary video Cable (GPSMAP 7015/7215 only)

Primary video Cable

➊

➋

➌

➍

➎

GPSMAP 6000/7000 Series Installation Instructions