alkitronic EASD 100 운영 및 유지보수 매뉴얼 - 페이지 5

{카테고리_이름} alkitronic EASD 100에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. alkitronic EASD 100 16 페이지. Mounting documentation system

페이지 인쇄

2.3

Hazard information

In case of any kind of damage to alkitronic® MDS

torque multipliers or accessories such as Li-ion bat-

tery pack (1), charging station (2) or charger (3) for

the rechargeable batteries of the sensor electronics

stop operation immediately.

The damaged unit must be inspected regarding its

mechanical and electrical safety. Repairs may only

be carried out by authorised and qualified person-

nel; any defects must be remedied or repaired

before the unit is used again.

Before starting repair work on mechanical or

electrical parts all electrical power sources must

be switched off and/or disconnected or the pres-

surized air supply must be disconnected from the

torque tool.

The charging station and/or the charger, as appli-

cable, must also be disconnected from the mains

electricity supply.

Additional safety instructions

Please refer to the standard operating instructions

of the torque tools alkitronic® M, alkitronic® CL,

alkitronic® EA.

MDS

Mounting Documentation Systems

2.4

2.5

Operation of the charging station and batteries, operation

battery-powered power screwdriver, preparation / operation

mechanical and electrical, functional and operational test,

maintenance, storage, maintenance / technical specifications.

Preparation / operation mechanical and pneumatical, func-

tional and operational test, maintenance, storage, mainte-

nance / technical specifications.

Prevention of data loss

Data memory sensor electronics, data commu-

nication

The memory in the MDS devices is limited to accept

data from no more than 400 bolting actions. When

this capacity is exceeded, data is overwritten on a

first in, first out basis.

Prevent the loss of stored data by using the

alkitronic® APP with a Bluetooth connection to

read the bolting action data and to transmit the

data to cell phones or other peripherals.

Attention!

This will irretrievably erase the data stored in

memory.

Use the alkitronic® APP to email the data as re-

quired.

Attention!

After sending the email all data will be buffered

and stored in a bolt case history. Individual cases

can be emailed again. Once the buffer is full, the

oldest data sets are deleted.

For a proper data transfer and archiving only the

operator is responsible. Data loss due to improper

usage by the operator is the sole responsibility of

the operator.

Mechanical operation and miscellaneous

For the following items please see the standard

operating instructions for the torque multiplier

alkitronic® EA.

For the following items please see the standard

operating instructions for the torque multiplier

alkitronic® M, alkitronic® CL.