Garmin GPSMAP 721xs Guide 참조 - 페이지 41

{카테고리_이름} Garmin GPSMAP 721xs Guide에 대한 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 721xs Guide 42 페이지. Technical reference for garmin nmea 2000 products
Garmin GPSMAP 721xs Guide에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지), 참조 매뉴얼 (2 페이지), 사용자 설명서 (28 페이지), 제품 정보 (37 페이지), 사용 설명서 (28 페이지), 템플릿 (2 페이지), 적합성 선언 (6 페이지), 구성 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (4 페이지), 설치 지침 매뉴얼 (8 페이지), 소유자 매뉴얼 (38 페이지)

Configuring the Wind Angle Filter

The wind angle filter governs how quickly the NMEA 2000-compatible display device shows a change in the wind angle. A lower filter setting

shows changes in the wind angle more gradually, and may stabilize the display.

To configure the wind angle filter:

1. While viewing the NMEA 2000 device information, select

2. Choose from the following options to adjust the filter settings.

• Off—the wind angle data is not filtered.

• On—select a lower number to update the display device less often, and help the gauge needle or wind angle number to move or change

more steadily.

• Auto—automatically adjusts the filter settings based on wind conditions.

Configuring the GWS 10 if the Filter and Offset Selections Are Not Displayed

Depending on the version of software loaded on your Garmin marine instrument, the specific configuration options may not be displayed on the

configuration screens.

To configure the wind angle offset if the menu option is not displayed:

Generic Configuration

1. Select

2. Enter the following command: "ANGLEOFFSET="

3. Follow the command with a number between 0 and 359, in degrees (for example: ANGLEOFFSET=180).

To configure the wind angle filter if the menu option is not displayed:

1. Select

Generic Configuration

2. Enter the following command: "ANGLEFILTER="

3. Follow the command with a number between 0 and 254, representing a time constant in increments of 0.25 second, or 255 to represent the

Automatic setting (for example: ANGLEFILTER=12).

To configure the wind speed filter:

1. Select Generic Configuration to specify data for the filter and offset settings.

2. Enter the following command: "SPEEDFILTER="

3. Follow the command with a number between 0 and 254, representing a time constant in increments of 0.25 second, or 255 to represent the

Automatic setting (for example: SPEEDFILTER=215).

Technical Reference for Garmin NMEA 2000 Products

Config

to specify data for the filter and offset settings.

Wind Angle

Filter.

NMEA 2000 Checklist