Garmin GPSMAP 8000 Series 소유자 매뉴얼 - 페이지 37

{카테고리_이름} Garmin GPSMAP 8000 Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 8000 Series 43 페이지. Installation instructions
Garmin GPSMAP 8000 Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (36 페이지), 빠른 시작 매뉴얼 (4 페이지), 사용 설명서 (15 페이지), 설치 지침 매뉴얼 (14 페이지)

페이지 인쇄

• To pan or tilt the camera, swipe the screen in the desired

direction.

Creating a Combination with Video

Functions

You can include up to four video functions in a custom

combination screen.

If your device has multiple built-in video connections, you can

use one built-in source for one function within each combination.

NOTE: The video source displays all connected, supported

video devices. You can select Show All to see a list of all

possible video inputs or video encoder channels that are not

connected to a video input source.

Select Combos > Menu > Add Combo.

Select Functions, and select a number.

Select an area to assign a function to, select Video, and

select a video source.

Repeat step 3 for all video functions in the combination

screen.

If necessary, customize the combination screen (Adding a

Custom Combination Screen).

Configuring the Video Appearance

NOTE: Not all options are available on all camera models and

chartplotter models.

From the video screen, select Menu > Video Setup.

Select an option:

• To show the video using a stretched aspect ratio, select

Aspect > Stretch. The video cannot be stretched beyond

the dimensions provided by the connected video device,

and it may not fill the entire screen.

• To show the video using a standard aspect ratio, select

Aspect > Standard.

• To adjust the brightness, select Brightness, and select

Up, Down, or Auto.

• To adjust the color saturation, select Saturation, and

select Up, Down, or Auto.

• To adjust the contrast, select Contrast, and select Up,

Down, or Auto.

• To allow the chartplotter to automatically select the source

format, select Standard > Auto.

Configuring the PC Display

Before you can configure the PC display mode, you must set the

video source to analog or digital PC.

When in PC display mode, select anywhere on the screen.

Select an option:

• To adjust the screen brightness, select the brightness

arrows.

• To adjust the screen contrast, select the contrast arrows.

Exiting PC Display Mode

When in PC display mode, select anywhere on the screen.

Select the display mode icon in the upper-left corner.

The video source changes to Video 1.

Controlling the VIRB

with the Chartplotter

Before you can control a VIRB X/XE action camera with the

chartplotter, you must connect the devices using a wireless

connection

(Connecting a Wireless Device to the Chartplotter).

You can connect up to five VIRB X/XE action cameras to the

chartplotter.

X/XE Action Camera

After you connect the VIRB X/XE action camera with the

chartplotter, a new option is added to A/V, Gauges, Controls.

You can start and stop recording on the VIRB X/XE action

camera using the chartplotter.

Select A/V, Gauges, Controls > VIRB®.

Select an option:

• To take a still photograph, select

• To begin recording, select

When recording, the remaining recording memory is

shown.

• To stop recording, select

• If you have more than one VIRB X/XE action camera

connected, use the arrows to select a different action

camera to control.

VIRB X/XE Action Camera Settings

Select A/V, Gauges, Controls > VIRB® > Menu.

Name: Allows you to enter a new name for the VIRB X/XE

action camera.

Recording: Starts and stops recording.

Take Photo: Takes a still photograph.

Sleep: Puts the VIRB X/XE action camera into a low power

mode to conserve battery power.

VIRB X/XE Action Camera Video Setup Settings

Select A/V, Gauges, Controls > VIRB® > Menu > Video

Setup.

Aspect: Sets the video aspect ratio.

Video Mode: Sets the video mode. For example, you can select

the Slow-Mo option to shoot slow motion videos.

Video Size: Sets the size or pixel dimensions of videos.

Video FPS: Sets the frames per second.

Photo Size: Sets the size or pixel dimensions of photos.

Field of View: Sets the zoom level.

Adding the VIRB X/XE Action Camera Controls to

Other Screens

Before you can control a VIRB X/XE action camera with the

chartplotter, you must connect the devices using a wireless

connection (Connecting a Wireless Device to the Chartplotter).

You can add the VIRB X/XE action camera control bar to other

screens. This allows you to start and stop recording from other

functions in the chartplotter.

Open the screen to which you will add the VIRB X/XE action

camera control bar.

Select Menu > Edit Overlays > Bottom Bar > VIRB Bar.

When viewing a screen that has the VIRB X/XE action camera

controls, you can select

VIRB X/XE action camera .

Device Configuration

Turning On the Chartplotter Automatically

You can set the chartplotter to turn on automatically when the

power is applied. Otherwise, you must turn on the chartplotter by

pressing .

Select Settings > System > Auto Power Up.

NOTE: When Auto Power Up is On, and the chartplotter is

turned off using , and power is removed and reapplied

within less than two minutes, you may need to press

restart the chartplotter.

System Settings

Select Settings > System.

again.

to open the full screen view of the

Device Configuration