Garmin GPSMAP 8400 series 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Garmin GPSMAP 8400 series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 8400 series 6 페이지.
Garmin GPSMAP 8400 series에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (9 페이지), 설치 지침 매뉴얼 (9 페이지)

페이지 인쇄

If the original waypoint was taken from a map, there

should be a legend on the map that lists the map datum

and position format used to create that map. Most often

this is found near the map key.

Select Settings > Units.

Select the correct map datum and position format

settings.

Create the waypoint again.

My chartplotter will not acquire GPS signals

If the device is not acquiring satellite signals, there could

be a few causes. If the chartplotter has moved a large

distance since the last time it has acquired satellites or has

been turned off for longer than a few weeks or months, the

device may not be able to acquire the satellites correctly.

• Make sure the GPS antenna has a clear view of the sky

to receive the GPS signal.

If it is mounted inside of a cabin, it should be close to a

window so it can receive the GPS signal.

• Make sure the GPS antenna is connected to the

NMEA

network.

• If the chartplotter has more than one GPS antenna

source, select a different source.

• Ensure the device is using the latest software, and

update the device software if necessary.

Updating the Device Software

You may need to update the device software when you

install this device or add an accessory to the network. You

can use one of two methods to update the software.

• Use the ActiveCaptain app.

• Download the update from www.garmin.com/support

/software/marine.html using a memory card (32 GB

max.) and a computer running Windows

system.

For more information, see the owner's manual at

www.garmin.com/manuals/GPSMAP8400-8600.

Registering Your Device

Help us better support you by completing our online

registration today. You can register your device using one

of two methods.

• Use the ActiveCaptain app.

• Go to my.garmin.com/registration and sign into your

Garmin account to register the device.

Keep the original sales receipt, or a photocopy, in a safe

place. After you add devices to the chartplotter network,

Quick Start Manual

operating