Garmin MSC 10 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Garmin MSC 10에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin MSC 10 14 페이지. Marine satellite compass

Mounting the Compass with the Cable Routed Outside the Pole

1 If necessary, position the stainless steel pole in the selected location.

2 Route the cable

through the pole-mount adapter, and place the cable in the vertical slot along the base of

the pole-mount adapter.

3 Connect the cable to the compass

4 Place the compass on the pole-mount adapter and fasten the included M4 screws

5 Screw the included metal nut

6 Screw the pole-mount adapter onto the pole, but do not fully tighten it.

7 Apply the included adhesive around the threads of the pole.

8 Align the compass so it is pointed toward the bow of the boat.

NOTE: You can use the sights on top of the compass to help align it.

9 While keeping the compass steady, finger tighten the nut.

10 Using a 35 mm (1

11 After the compass is secured on the pole mount, fill the remaining gap in the vertical cable slot with a

marine sealant (optional).

12 Wipe off any excess adhesive or marine sealant.

13 Route the cable away from sources of electronic interference.

onto the threaded pole as close to the base as possible.

in.) wrench, turn the jam nut

turn to secure it.

to secure it.