AEG Dishwasher 사용자 설명서 - 페이지 12

{카테고리_이름} AEG Dishwasher에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG Dishwasher 24 페이지.

Manual adjustment

1. Press the on/off button to activate

the appliance.

2. Make sure that the appliance is in

setting mode. Refer to 'SETTING

AND STARTING A PROGRAMME'.

3. Press and hold Delay and Start at

the same time until the indicators

(A), (B) and (C) flash.

4. Press Program.

Turn the water hardness dial to the po-

sition 1 or 2.

• The indicators (B) and (C) go off.

• The indicator (A) continues to

flash.

• The display shows the setting of

the water softener. Example:

= level 5.

5. Press Program again and again to

change the setting.

6. Deactivate the appliance to confirm.

CAUTION!

Only use dishwasher salt. Other

products can cause damage to

the appliance.

Water and salt can come out

from the salt container when

you fill it. Risk of corrosion. To

prevent it, after you fill the salt

container, start a programme.

1. Turn the cap counterclockwise and

open the salt container.

2. Put 1 litre of water in the salt con-

tainer (only for the first time).

3. Fill the salt container with dish-

washer salt.

4. Remove the salt around the open-

ing of the salt container.

5. Turn the cap clockwise to close the

salt container.