Garmin Colorado 400c 소유자 매뉴얼 - 페이지 41

{카테고리_이름} Garmin Colorado 400c에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Colorado 400c 48 페이지. Oregon series
Garmin Colorado 400c에 대해서도 마찬가지입니다: 소유자 매뉴얼 (40 페이지), 소유자 매뉴얼 (48 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 중요 안전 정보 (48 페이지), 소유자 매뉴얼 (26 페이지), (덴마크어) 매뉴얼 (48 페이지)

Connecting Your Colorado to a

Computer

You can connect the Colorado to your computer using

the supplied USB cable.

NOTE: Install the supplied MapSource

Waypoint Manager software on your computer before

connecting the USB cable. Follow the instructions

provided with the software.

To connect your Colorado to your computer:

1. Lift the weather cap on the top of the Colorado and

insert the smaller connector on the USB cable into

the USB mini-B jack.

2. Connect the remaining cable end to an empty USB

port on your computer.

Information �bout USB Drivers

The USB drivers are automatically installed when you

install the MapSource Trip and Waypoint Manager

software that came with your Colorado. When you

initially connect the Colorado to a USB port, your

computer might prompt you to locate the destination

of the drivers for the device. You only need to install

Colorado

Series Owner's Manual

™

the drivers once. After the drivers are installed, your

computer always detects your Colorado when it is

connected. USB drivers might be updated periodically.

You can find updates at www.garmin.com.

Transferring Tracks, Routes, or

Trip and

Waypoints from the Colorado to Your

Computer

Tracks, routes, and waypoints saved on your Colorado

can be saved and viewed in the Trip and Waypoint

Manager software.

To transfer tracks, routes, or waypoints:

1. Ensure that Trip and Waypoint Manager is installed

on your computer and open.

2. Ensure that the Colorado is connected to the

computer with the USB cable and powered on.

3. Click the

icon at the top of the screen.

ppendIx