Garmin Colorado 400c 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Garmin Colorado 400c에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Colorado 400c 26 페이지. Oregon series
Garmin Colorado 400c에 대해서도 마찬가지입니다: 소유자 매뉴얼 (40 페이지), 소유자 매뉴얼 (48 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 소유자 매뉴얼 (48 페이지), 중요 안전 정보 (48 페이지), (덴마크어) 매뉴얼 (48 페이지)

ettinG

tarted

Connecting Your Colorado to a

Computer

You can connect your Colorado to your computer using

the PC/USB connector cable.

NOTE: Install the supplied MapSource Trip &

Waypoint Manager software on your computer

before connecting the USB cable to the computer.

Follow the instructions for installation and

operation provided with the software.

To connect your Colorado to your

computer:

1. Lift the USB port protective cover on the top of

the Colorado and insert the smaller connector on

the USB cable into the USB mini-B jack.

2. Connect the remaining cable end to your

computer's USB port.

The USB drivers are automatically installed when you

install the MapSource Trip and Waypoint Manager

software that came with your Colorado. When you

initially connect the Colorado to a USB port, your

External GPS

antenna connector

USB mini-B jack

computer might prompt you to locate the destination

of the drivers for the device. You only need to install

the drivers once. After the drivers are installed, your

computer always detects your Colorado when it is

connected. USB drivers might be updated periodically.

You can find updates at www.garmin.com.

Colorado Series Owner's Manual