Garmin Echo 100 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Garmin Echo 100에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Echo 100 13 페이지. Flush mount template
Garmin Echo 100에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (6 페이지), 템플릿 (1 페이지), 소유자 매뉴얼 (10 페이지), 소유자 매뉴얼 (21 페이지), 소유자 매뉴얼 (20 페이지)

페이지 인쇄

Using the echo 100 and echo 150

Sonar Screen

The sonar screen shows a full-view graph of sonar readings from a

transducer. The depth scale

indicated on the right of the screen shows

➊

the screen depth as the screen scrolls from the right to the left, indicating

suspended targets

. Bottom depth

➋

temperature-capable transducer is connected), and transducer frequency

are indicated on the left side of the screen.

NOTE: The echo 100 operates only at 200 kHz, so the frequency is not

displayed on the screen.

➌

➍

➎

, water temperature

(if a

➌

➍

➋

➊

Adjusting the range of the Depth Scale

You can adjust the range of the depth scale that appears on the right side

of the screen. This setting determines how deep the sonar will search for

returns.

1. From the Sonar screen, select MENU > Range.

2. Select an option:

• To allow the device to adjust the range automatically based on the

➎

depth, select Auto.

• To increase or decrease the range of the depth scale manually, select

Manual, select

Adjusting the Zoom on the Sonar Screen Manually

You can manually adjust the zoom of the Sonar screen by selecting the span

of the view and selecting a fixed starting depth. For example, if you select a

span of 15 feet and a starting depth of 5 feet, the device will display an area

from 5 feet deep to 20 feet deep.

1. From the Sonar screen, select MENU > Zoom > Manual.

2. Select the span you would like to show.

3. Select the starting depth.

, then select ENTER.

echo 100 and echo 150 Owner's Manual