Garmin Fusion BB100 설치 지침 매뉴얼 - 페이지 6
{카테고리_이름} Garmin Fusion BB100에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fusion BB100 12 페이지. Black box entertainment system with wired remote control
Garmin Fusion BB100에 대해서도 마찬가지입니다: 설치 지침 (4 페이지)
페이지 인쇄
Connecting to Power
When connecting the stereo to power, you should connect it through the ignition or another manual switch.
If it is necessary to extend the power and ground wires, use 14 AWG (2.08 mm
than 1 m (3 ft.), use 12 AWG (3.31 mm
1 Route the red power wire
to the battery.
2 If necessary, route a wire
3 Route the wiring-harness plug to the stereo.
Do not connect the wiring harness to the stereo until after all of the bare wire connections have been made.
4 Connect the black wire to the negative (-) battery terminal.
5 Connect the red power wire to the ignition or another manual switch, and connect the switch to the positive
(+) battery terminal if necessary.
6 Connect the wiring harness plug to the stereo.
6
2
) wire.
to the ignition or another manual switch
between the switch and the battery .
2
) wire. For extensions longer
, and route the black ground wire
Fusion BB100 Installation Instructions