AEG F55402VI0P 사용자 설명서 - 페이지 7
{카테고리_이름} AEG F55402VI0P에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG F55402VI0P 16 페이지.
AEG F55402VI0P에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지)
페이지 인쇄
6) Use this programme to quickly rinse the dishes. This prevents the remaining food to
bond on the dishes and bad odours to come out from the appliance.
Do not use detergent with this programme.
5. OPTIONS
Activate or deactivate the multi-
tab option before the start of a
programme. You cannot activate
or deactivate the option while a
programme operates.
5.1 Multitab
Activate this option only when you use
the combi detergent tablets.
This option deactivates the flow of rinse
aid and salt. The related indicators are
off.
The programme duration can increase.
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode. Refer to
'SETTING AND STARTING A PRO-
GRAMME'.
2. Press and hold function buttons (D)
and (E) at the same time until the
multitab indicator comes on.
The option stays on until you deactivate
it.
• Press and hold function buttons (D)
and (E) at the same time until the mul-
titab indicator goes off.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Deactivate the multitab option.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the wa-
ter hardness in your area.
6. Adjust the released quantity of rinse
aid.
5.2 Acoustic signals
The acoustic signals operate in these
conditions:
• The programme is completed.
• The level of the water softener is ad-
justed electronically.
• The appliance has a malfunction.
Factory setting: on. You can de-
activate the acoustic signals.
Deactivating the acoustic signals
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode. Refer to
'SETTING AND STARTING A PRO-
GRAMME'.
2. Press and hold function buttons (B)
and (C) at the same time until the in-
dicators of function buttons (A), (B)
and (C) flash.
3. Press function button (C),
• The indicators of function buttons
(A) and (B) go off.
• The indicator of function button (C)
continues to flash.
• The display shows the setting of
the acoustic signals.
4. Press function button (C) to change
the setting.
5. Deactivate the appliance to confirm.
ENGLISH
7
On
Off