AEG F55412VI0 사용자 설명서 - 페이지 9
{카테고리_이름} AEG F55412VI0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG F55412VI0 24 페이지.
AEG F55412VI0에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
페이지 인쇄
German de-
French degrees
grees (°dH)
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Whether you use a standard detergent
or multi-tabs (with or without salt), set
the proper water hardness level to
keep the salt refill indicator active.
Multi-tabs containing salt
are not effective enough to
soften hard water.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
and the display is blank.
2. Press
.
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting: e.g.
3. Press
again and again to change
the setting.
4. Press the on/off button to confirm
the setting.
6.3 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
mmol/l
(°fH)
7 - 18
0.7 - 1.8
<7
<0.7
and
,
start to flash
and
continues to
= level 5.
Clarke de-
grees
5 - 12
< 5
to refill rinse aid. If you are using multi-
tabs containing rinse aid and you are
satisfied with the drying result, you can
deactivate the notification for refilling
rinse aid. However, we recommend that
you always use rinse aid for best drying
performance.
If you use standard detergent or multi-
tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse
aid empty notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
and the display is blank.
2. Press
.
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting.
–
= rinse aid empty
notification activated.
–
= rinse aid empty
notification deactivated.
3. Press
to change the setting.
4. Press the on/off button to confirm
the setting.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
ENGLISH
9
Water softener lev-
el
2
2)
1
and
,
start to flash
and
continues to