Garmin GMR 24 XHD3 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Garmin GMR 24 XHD3에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GMR 24 XHD3 15 페이지.

Determining the Radar Mounting Height

If you plan to install the radar on a roof or hard top, you should install it high enough to avoid interference from

the surface.

1 Based on the shape of the roof, complete an action:

• Measure the distance from the intended mounting location to the furthest front corner of a rectangular

roof

• Measure the distance from the intended mounting location to the front apex of a curved roof

2 Use this equation to determine the mounting height of the radar based on the distance you measured in the

previous step:

(Distance (mm)

(Distance (in.)

× 0.222) - 6 = height (in.)

For example, if the mounting location is 2 m (6.6 ft.) from the corner of the roof, this is how you would

complete the equation to determine the mounting height after converting to mm (or in.):

(2000 mm × 0.222) - 150 = 294 mm

(78 in. × 0.222) - 6 = 11.3 in.

3 Install a riser or other fixture so the base of the radar is equal to or higher than the distance you calculated in

the previous step.

× 0.222) - 150 = height (mm)

NOTICE