Garmin GMR Fantom 254 설치 지침 매뉴얼 - 페이지 11

{카테고리_이름} Garmin GMR Fantom 254에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GMR Fantom 254 19 페이지.

Connecting a Garmin Marine Network Cable

1 Route one end of the Garmin Marine Network cable to the radar.

NOTE: The included Garmin Marine Network cable uses a 90-degree connector to connect to the NETWORK

port on the radar housing so that it fits correctly behind the radar door. If you do not plan to install the door

on the radar housing, you can purchase a Garmin Marine Network cable with a straight connector from your

Garmin dealer.

2 Connect the cable to the NETWORK port on the radar.

Use caution when connecting the cable to the radar. If you attempt to connect the cable at an angle, you may

damage the pins on the NETWORK port.

3 Turn the ring on the cable clockwise to secure the cable to the radar.

Installing a Garmin Marine Network Adapter Cable

If necessary, you can use the included Garmin Marine Network adapter cable to connect this device to your

chartplotter or GMS 10 network port expander.

1 Connect the Garmin Marine Network cable to the device, and route it to your chartplotter or port expander.

2 If it is not already pre-installed, connect the included adapter to the end of the Garmin Marine Network cable.

3 Connect the adapter cable to your chartplotter or port expander.

NOTICE